What Moon Phase Actually Changes About the Tide

Moon phase is the cheapest tide forecast available, and it is routinely asked to do a job it cannot do. The phase does not set the clock: high water arrives on the station schedule whether the moon is new or full.

reading conditionsDifficulty 2/5
Cover illustration: What Moon Phase Actually Changes About the Tide

Key facts

Key factDetail
Lunar month29.5 days, with 2 spring and 2 neap tides
Spring tideNew or full moon, larger range
Neap tideFirst or third quarter, smaller range
Perigee cycleAbout 28 days; apogee about 14 days later
Perigean spring tide6 to 8 a year, more than 1 foot above an apogean spring
Moon distanceAbout 31,000 miles of variation in a month
Solar tideAbout half the height of the lunar tide
Anchorage spring difference3 feet or more on a 30-foot range

What the phase changes

What the phase changes is range, the difference in height between successive high and low water, and with it the volume of water that moves, the speed of the flow and the height at which a mark becomes usable or dangerous. This reading applies to any tidal shore where you plan around a published tide table. After the phase tells you the kind of day, the predicted heights tell you where to stand, how much lead to carry and how long a low-water window lasts. The sun and moon both raise tides, and the moon does more of the work. Its pull is about twice as strong as the sun's, and the solar tide is about half the height of the lunar tide. When the three bodies fall into line at new or full moon, the two pulls add and the range grows. When the sun and moon sit at right angles at the first or third quarter, the solar bulge partly cancels the lunar one and the range shrinks. A lunar month of 29.5 days contains two spring tides and two neap tides. A spring tide raises the high and lowers the low. The range, not the absolute height, is what changes. On a coast where the spring range is half again the neap range, the same mark sees a large difference in water level between the two weeks, and the current that moves that water is stronger at the peak of the spring. The phase is a label for the range. The tide table gives the numbers for your station. Phase does not move the clock. The tide is a long wave driven by the Earth's rotation through the tidal bulges, and its timing at a station depends on the basin, the coastline and the water depth. The predicted times and heights on a NOAA tide table already include the positions of the sun and moon. Reading the moon symbol and skipping the table replaces a measured number with a category. Range changes three things on the bank. More water passes the same section in the same six hours, so the flow runs faster at the peak of the tide. More low water exposes sand, rock and weed that stay covered on a neap. More high water reaches ledges and steps that stay dry on a neap. Each is a position and timing problem, and each is visible in the table before you leave.

The two-week cycle

Spring to neap is roughly a week. A neap tide follows a spring tide by about seven days, and the next spring arrives about seven days after that. Over a 29.5-day lunar month the pattern repeats twice, so a mark gets two large-range windows and two small-range windows every month. That rhythm is more useful than the phase name. If a mark needs a low tide below a certain height to be walkable, the spring week gives several days that fit and the neap week gives none. If a mark needs water over a ledge to fish, the neap week is the one with the shorter high. Plan the trip in two-week blocks and use the phase only to find which block you are in. Tidal pattern complicates the label. A semidiurnal coast gets two similar highs and two similar lows each day, and the spring range raises both. A mixed semidiurnal coast gets two highs of different height and two lows of different height, so one daily high may clear a ledge while the other does not. A diurnal coast, such as much of the Gulf of Mexico, gets one high and one low each day, and the whole window is a single event. The phase changes the range in all three patterns, but the usable window is not the same shape. The practical check is the pair of highs on the day you plan to fish. On a mixed coast, compare the two predicted highs with the height your mark needs. The higher high may arrive in daylight or at night, and the lower high may be the only one that fits your schedule. A spring tide does not guarantee that the useful high is the one you can fish.

Perigee, apogee and the larger spring

The moon's orbit is elliptical. Its distance from Earth varies by about 31,000 miles over a month, and the tide-raising force rises as the moon comes closer. Perigee arrives about every 28 days, and apogee follows about 14 days later. A spring tide that coincides with perigee produces a perigean spring tide, the largest range in the cycle. Perigean spring tides occur 6 to 8 times a year. High water during one can stand more than a foot above the high of an apogean spring tide. The difference grows with the local range: in Anchorage, where the range exceeds 30 feet, the difference between spring tides can reach 3 feet or more at high water. A 1-foot difference is enough to cover a step or open a channel that is dry on an ordinary spring. The highest tide of a year is not always perigean. Seasonal mean sea level, thermal expansion of warmer water, onshore wind and low barometric pressure can each add height. A perigean spring tide that arrives with a strong onshore wind and low pressure can put water where no table alone predicts it. The planning rule is comparison. Pull the predicted highs for the date and compare them with the same station's ordinary spring highs for the month. If the predicted high is clearly above that baseline, treat the low as lower and the high as higher, then move the car and shorten the low-water walk.

Why the same phase gives different heights

A phase label travels, but the height does not. Funnel-shaped bays and estuaries magnify the tide because a large volume of water is forced into a small space. The Bay of Fundy shows the effect at its largest scale, with a range above 15 metres. Narrow inlets amplify in the same way. Broad mud flats and shallow inland bays damp the tide, and some of them behave as non-tidal even with an ocean inlet. River flow can mask the astronomical tide. In estuaries with strong tidal rivers, such as the Delaware and the Columbia, seasonal spring flows can alter or override the incoming tide. The same spring phase that produces a clean range on the open coast can produce a smaller or later rise inside the river. Weather sits on top of the prediction. Strong offshore wind moves water away from the coast and exaggerates low-tide exposure. Onshore wind piles water against the shore and can erase a low tide. High pressure depresses sea level and low pressure raises it. A spring tide with the wrong wind is a different day from a spring tide with the right one, and the difference is often larger than the perigean correction. Station distance matters as much as phase. A prediction belongs to a gauge, not to a beach. A mark several kilometres up an estuary or around a headland can see the high later and at a different height. Use the nearest station, then check the mark against the predicted curve. Two visits at different ranges tell you the offset faster than any rule.

Reading the table against the mark

Choose one mark and one number. The number is the predicted height at which the mark becomes usable: the low that exposes the access, the high that covers the ledge, the height at which the gully fills behind you. Write it on the tide printout. The phase tells you whether the coming week can reach that number. The table tells you the day and hour. Read the shape of the curve, not just the two extremes. Water moves slowest near high and low and fastest in the middle two hours of a flood or ebb. A 1-metre rise spread across six hours does not deliver the same flow at every stage. The hour after low water moves less water than the hour before high, and the difference changes when a gully becomes passable. Use the datum correctly. Predicted heights are referenced to a tidal datum, commonly mean lower low water, not to the seabed. A predicted 1.2 metres is a height above that datum, not a depth under the boat. Charted depths and predicted heights use different references, and adding them without checking the datum produces a number that fits neither. Set a margin in the same units as the table. If the exit needs 0.5 metres to stay dry and the predicted high is 1.1 metres, the margin is 0.6 metres. If wind or pressure can add 0.3 metres, the margin is smaller than the forecast error. The margin is a decision rule, not a feeling: pick the number, write it down, and leave when the water reaches it.

Lead, position and the low-water window

Spring range means more flow. The same channel carries a larger volume in the same tidal period, so the peak current is stronger. A lead that holds on a neap tide can drag on a spring tide in the same spot. The correction is weight and shape: a heavier lead, a flatter lead, or a grip lead on sand, and a shorter cast into slower water if the edge is too fast. Position follows the range. On a spring low, fish the marks that are only exposed at that range, and plan the retreat before the first cast. On a spring high, expect water on steps and ledges that are dry on a neap. On a neap, the high-water mark may never become fishable, and the low-water mark may stay covered. Pick the mark that matches the range rather than forcing the same mark every week. The perigean day needs its own margin. A high that is a foot above the ordinary spring can put a usual standing spot in the wash, and a low that is a foot lower can open a route that is normally closed. Both directions change the plan. The low-water window is also shorter than the table suggests: a route that needs the last 0.4 metres of the ebb is usable for a short period around low, and the flood reclaims it at a rate set by the range.

When the moon is not the reason

A blank on a spring tide is not evidence that the phase failed. Feeding depends on the presence of bait, water temperature, light, colour and the stage of the tide. The phase changes range and night illumination. It does not switch feeding on. A full moon lights the surface and can move bait deeper, which changes where a lure should run, not whether fish are present. The common misreads are consistent. Planning by moon symbol and ignoring the table is the first. Treating a full moon as the best night is the second; range and wind matter more. Ignoring the perigean correction is the third. Blaming the moon for a blank is the fourth, and it hides the variable that actually failed. A distant station is an easy error to miss. The prediction for a port may be an hour and a half early for a beach at the head of a bay. The phase is the same at both places, so the phase cannot warn you. Check the station list, pick the one closest to the mark, and compare one observed high with the prediction before trusting the rest of the week. Verification is one line in a notebook. Record the predicted high and low, the observed height at the mark when the water reached your number, and the wind. After two spring-neap cycles, the offset and the wind correction are yours, and the phase becomes a planning shortcut rather than a superstition. Before the next trip, write the mark's usable height on the tide printout and circle the day the prediction crosses it. That number, not the moon symbol, sets the last cast.

Sources

  1. What are spring and neap tides? — NOAA National Ocean Service · T1
  2. What is a perigean spring tide? — NOAA National Ocean Service · T1
  3. Tidal Variations: The Influence of Position and Distance — NOAA National Ocean Service · T1
  4. Types and Causes of Tidal Cycles — NOAA National Ocean Service · T1
  5. Moon Phases — NASA Science · T1
  6. Tidal Datums — NOAA Tides and Currents · T1