Amphidromic Point: A Spot With Almost No Tide

On a cotidal chart of the North Atlantic there is a point west of the British Isles where the lines of equal high-water time meet and the range falls almost to nothing. Water near that point still moves, but it barely rises and falls, and the tide appears to swing around the node rather than across it. The feature is an amphidromic point, and it is not a curiosity for navigators.

tides
Cover illustration: Amphidromic Point: A Spot With Almost No Tide

Key facts

QuestionAnswer
DefinitionA node where the tidal amplitude approaches zero
PhaseUndefined at the node and rotating around it
RotationCounterclockwise in the northern hemisphere
CauseCoriolis effect on a standing wave in a basin
Cotidal linesRadiate from the node at about 30° per hour
Range nearbyGrows with distance from the node
Practical effectWeak tidal currents and a weather-dominated level
Chart readingLines converge on the node, spacing shows the gradient

A node, not a place without water

It marks the place where the usual relationship between tide, current and stage breaks down, and where a plan built on a regional range figure will be wrong by more than a metre. An amphidromic point is the zero-amplitude point of a tidal system. At the node the water level does not rise and fall with the astronomical tide, because the wave that produces the tide has a node there. The phase of the tide is undefined at the point itself, since there is no high water to time. The water is not still. A coast near an amphidromic point can have weak tidal currents, wind-driven movement and weather-driven level changes. What it lacks is a reliable astronomical rise and fall. A tide table for such a place may show a range of a few centimetres, and the real variation in level may be dominated by pressure and wind. The feature is a property of the basin, not of the open ocean alone. Each ocean basin, and many marginal seas, can contain one or several amphidromic points, and their positions depend on the basin's shape, depth and rotation. The node is a fitted result, not an observed hole in the water. Harmonic analysis of many tide gauges produces amplitude and phase at each station; the amplitude falls toward zero somewhere between the gauges, and the phase changes rapidly around that place. The chart interpolates between stations, which is why the exact position of a node on a small-scale chart is less certain than its general location. A node can also move with the constituent. The M2 node and the K1 node sit in different places because the two waves have different wavelengths and respond to different parts of the basin. A chart drawn for one constituent does not describe the other.

Why the tide rotates

The rotation comes from the Coriolis effect acting on a long wave in a rotating basin. A tide entering a basin is reflected at the boundaries, and the combination of the incoming and reflected waves produces a standing oscillation. On a rotating earth, that oscillation becomes a Kelvin wave, trapped against the boundary and decaying across the basin. The result is a wave that runs around the basin boundary with the coast on its right in the northern hemisphere. High water travels along the coast, and the interior of the basin shows a system of cotidal lines that radiate from a node. The node is where the amplitude of the standing oscillation passes through zero. The decay across the basin sets the scale. A Kelvin wave loses amplitude over a distance of roughly the wave speed divided by the Coriolis parameter. In 100 m of water the speed is about 31 m/s, and at mid-latitudes the Coriolis parameter is close to 0.0001 per second, which gives a decay scale near 300 km. A node therefore sits hundreds of kilometres from the coast whose tide it governs, and no harbour survey will ever draw one. This is why amphidromic points are a large-scale feature. They are not created by a local headland or a harbour wall. They are the signature of a basin-scale wave, and their positions are set by the dimensions of the sea.

Cotidal lines and the hour spokes

A cotidal line joins places where high water arrives at the same time. Around an amphidromic point the lines radiate like the spokes of a wheel, and high water travels around the node once per tidal cycle. The arithmetic of the spokes is simple. A semidiurnal tide has a period near 12.42 hours, so the phase advances about 29 degrees per hour. Twelve spokes, spaced roughly 30 degrees apart, cover a full cycle. That is why charts often label cotidal lines by the hour of high water, and why the lines around a node look like a clock face. The direction of travel is the useful part. In the northern hemisphere the tide progresses counterclockwise around the node. In the southern hemisphere it progresses clockwise. An angler reading a cotidal chart can therefore tell which way the high water is moving along a coast without any local data.

Range grows away from the node

The amplitude of the tide near an amphidromic point increases with distance from the node. Close in, the range is small and the phase changes rapidly from one spoke to the next. Farther out, the range is larger and the phase changes more slowly along a given stretch of coast. That gradient is the practical content of the chart. Two marks on adjacent spokes may have similar ranges but high water an hour apart. Two marks on the same spoke but at different distances from the node may have similar timing and very different ranges. A corange chart, which joins places of equal range, adds the second dimension. Where corange lines are tightly packed, the range changes quickly over a short distance. Where they are widely spaced, the range is nearly uniform and a borrowed prediction is safer. The gradient also changes with the spring-neap cycle. A spring tide increases the amplitude everywhere, but the node remains a node, and the proportional increase near it can still leave a range too small to plan around.

More than one node in a basin

A large basin can contain several amphidromic points, each associated with a different constituent or with a different mode of oscillation. The M2 node and the K1 node are generally in different places, so a coast can have a small semidiurnal range and a larger diurnal range, or the reverse. That is one reason a tide table at an amphidromic coast can look odd. The two daily highs may be very unequal, or there may effectively be one high per day, because the semidiurnal component is suppressed while the diurnal component is not. The form factor, the ratio of diurnal to semidiurnal amplitude, is large at such a place. Read the factor as a number. Below 0.25 the tide is semidiurnal, with two highs of similar height each day. Above 3.0 it is diurnal, with one high and one low in a lunar day. Between the two the tide is mixed, and the two daily highs differ in height by an amount that follows the diurnal constituent. A node that suppresses M2 and leaves K1 intact pushes a coast into the third group. A basin can also contain degenerate amphidromic points, where the node sits on the boundary rather than in the interior. The practical effect is similar: the range collapses near that point, and the phase rotates around it.

Reading the chart before the trip

Find the nearest cotidal chart for the sea area and locate the node. Then locate the mark. The distance and direction from the node tell you two things: how large the range is likely to be, and which way the phase is rotating. If the mark sits close to the node, do not plan around the astronomical tide. Plan around weather and around the residual currents, and treat the tide table as a weak signal. A predicted range of ten centimetres is not a plan; it is noise beside a passing front. If the mark sits on a spoke where the lines are crowded, expect a large phase difference over a short distance and use the nearest gauge. If the lines are widely spaced, the phase is nearly constant along the coast and a nearby station is a good proxy.

What the node does to the fishing

Near an amphidromic point the tidal currents are weak, because the water has little rise and fall to drive them. Marks that depend on current to position fish, such as headlands, inlet mouths and channel edges, lose their tidal rhythm. The fish may still be there, but the feeding windows are set by light, wind and bait rather than by the stage of the tide. The level is also more sensitive to weather. A small astronomical range means that a storm surge or a sustained onshore wind can dominate the water level. Flooding, access and the state of a flat can change by more than the tide does, and the forecast becomes more important than the table. That sensitivity runs both ways. A sustained offshore wind can push the level below the predicted low and expose ground that the table never shows dry. A deep low crossing the coast can lift the level above the predicted high without any spring tide. Near a node, the weather is not a correction to the tide; it is the tide. The arithmetic makes the point. One hectopascal of pressure change moves the sea surface by about a centimetre, so a 20 hPa low lifts the level around 20 cm. Against an astronomical range of 10 cm, that is the whole signal and then some. Wind set-up adds another term on top, and in a shallow bay a sustained onshore push of 20 kt holds the level up for as long as the wind lasts. The currents near a node are weak but not absent. Residual flow from river discharge, shelf circulation and wind-driven transport continues, and those are the currents that position bait and fish. A mark near a node can still fish well when the residual flow runs against structure, even though the tidal stream is negligible. On the other side of the node, a short run along the coast restores a normal range and a normal current. That is why a mark twenty kilometres from a dead tide can fish like a completely different coast, and why a regional summary is useless in such a place.

A note on scale

Amphidromic points are basin-scale features, and the charts that show them are small-scale. A cotidal chart covering the North Atlantic will not resolve a harbour, and a harbour chart will not show the node. Use the small-scale chart to understand the phase rotation and the local gauge to plan the day. The two scales answer different questions. The basin chart tells you why the range is small and which way the tide turns. The gauge tells you what the water will do at the mark tomorrow. Keeping them separate avoids the common error of applying a basin-scale pattern to a harbour-scale decision.

Sources

  1. Tides — NOAA JetStream · T1
  2. Tides and Currents Glossary — NOAA Tides and Currents · T1
  3. Tidal Glossary — Permanent Service for Mean Sea Level · T2
  4. Ocean Circulation and Climate — International Geophysics Series · T2