406 Beacons: Register, Test and Cancel False Alerts

The beacon sits in a grab bag for years, and the only time anyone thinks about it is the moment it is switched on. That is the wrong moment to discover that the registration still lists the previous owner, the battery is past its date, or the device was never registered at all. A 406 MHz beacon is a system, and the satellite is only one part of it.

safety and hazards
Cover illustration: 406 Beacons: Register, Test and Cancel False Alerts

Key facts

ItemRequirement or figure
Signal406 MHz digital, with beacon type and owner data
Registrationfree, and kept current
Registration termvalid two years, then revalidate
False alerts98% of 406 activations
Cancellationcall the US Coast Guard with the beacon ID
Testinguse the self-test function only
Penaltyfines for failing to register or update
Disposalremove from service and update the record

Why the signal changed

NOAA SARSAT describes the 406 MHz beacons as digital devices that transmit a signal containing information on the type of beacon, the owner and the vessel or aircraft. That digital message is far more reliable than the old analogue beacons, which carried no identification and gave rescuers much less to work with. The identity in the message is what connects the alert to a person who can answer a phone. An older analogue beacon could be detected, but it could not say who was in trouble or which vessel was transmitting. The 406 MHz digital signal carries a unique identity, and the satellite system uses that identity to look up the registration record. The record is what tells a rescue coordination centre whether the alert comes from a boat that is actually at sea, a device that was switched on in a garage, or a beacon that was sold three owners ago. The frequency itself is part of the design. The 406 MHz band is reserved for distress beacons, and the signal is a short digital burst rather than a continuous tone. The burst carries the beacon's identity and, on units with an internal GNSS receiver, an encoded position. The satellite system measures the signal and works out where it came from; the digital message says who it came from. The advantage is not only speed. A digital alert with a confirmed identity can be treated as a real distress or dismissed as a false alarm with a phone call, while an unidentified alert ties up rescuers until someone can be sent to look. The message identifies the beacon; the record identifies the person.

Three kinds of beacon, one system

An EPIRB is designed to float free and transmit from the water. A PLB is a personal unit carried on a belt or in a pocket, intended for a person who has left the vessel. An ELT is an aviation beacon that activates on impact. All three use the 406 MHz distress system, and all three depend on a registration record. The differences matter when you choose and mount one. An EPIRB in a float-free bracket is designed to release and activate if the vessel sinks, which is the scenario a boat crew cannot manage by hand. A PLB has to be switched on by the person carrying it, so it is only useful if that person is conscious and has it within reach. An ELT belongs to the aircraft, not to the angler, and its alerts are handled through a different coordination chain. A PLB is not a substitute for an EPIRB on a vessel. It covers the person, not the boat, and it depends on the wearer. An EPIRB is not a substitute for a PLB on a crew member who may go over the side away from the vessel. The two devices answer different questions, and a well-found boat may carry both.

The registration record

Registration is free and required by law for EPIRBs, PLBs and ELTs. NOAA's beacon awareness page is direct about the reason: up-to-date owner information allows search and rescue resources to be used efficiently and can shorten the response during a distress. When the record is current, a rescue centre can call the owner or the vessel's contact and ask whether the beacon is real. The record does not stay current by itself. Registration is valid for two years, and owners are required to validate the information every two years so that phone numbers, addresses and vessel details remain usable. A move, a new phone number, a change of vessel or a change of owner all create a gap between the beacon in the water and the person a rescuer is trying to reach. The fields that matter most are the ones a rescue centre uses at three in the morning: a phone number that rings, an emergency contact who knows the boat, the vessel's name and type, and the planned area of operation. A registration that lists a disconnected number is only marginally better than no registration at all, because it costs the centre time to discover that the record is stale.

When it fires

An activation starts a chain that runs from the satellite to a ground station to a mission control centre and then to a rescue coordination centre. The registration details are used to contact the owner, the vessel or an emergency contact. If the activation is accidental, that call is the chance to stop the response before a boat or aircraft is launched. NOAA's guidance is to contact the US Coast Guard at 1-855-406-USCG and provide the beacon's ID to cancel the false alert. An ELT or PLB activation is cancelled through the Air Force Rescue Coordination Center at the number listed by NOAA. Do not simply switch the beacon off and assume the problem is solved; the alert may already be in the queue, and an uncancelled false alert has the potential to put rescuers in harm's way. NOAA's beacon awareness material puts the false-alert share at 98% of 406 activations, which is why registration details and a working phone number are treated as part of the safety equipment rather than as paperwork. A false alert that is cancelled in the first hour costs a phone call. One that is not cancelled can launch a search that puts other people at risk.

Test the beacon and cancel alerts

A beacon needs to be tested, but it does not need to be activated to be tested. Use the self-test function described by the manufacturer, confirm that the battery and the status indicators are within spec, and follow the test schedule in the manual. Self-tests and annual tests are themselves a common source of false alerts, so a test that runs longer or differently from the instructions can send a real alert to the satellite system. A 406 beacon is not a radio for routine checks. There is no "radio check" equivalent, and a live transmission is a distress alert whether or not the boat is in trouble. The self-test is designed to exercise the electronics and the battery without transmitting a distress message, and it is the only test an owner should run. If a test or an accidental switch-on does produce an alert, cancel it. Keep the beacon's ID and the cancellation numbers where they can be reached without opening the grab bag in the dark. A label inside the raft or on the beacon itself is more useful than a number stored in a phone that is in the water. Record the beacon ID somewhere ashore as well. The ID is printed on the device and on the registration confirmation, and it is the one piece of information the rescue centre needs to match an alert to a record. A photograph of the label, stored with the boat's papers, is enough.

Battery, bracket and hydrostatic release

An EPIRB is a battery-powered device with a service life, and the battery has to be replaced on the maker's schedule whether or not the unit has been used. The expiry date is marked on the battery or the case. A beacon with an expired battery may still transmit, but the duration and the power are no longer what the approval assumes. A float-free EPIRB sits in a bracket with a hydrostatic release. The release is a separate consumable with its own expiry date, and it is the part that lets the beacon float free and switch on if the vessel sinks. A bracket that has been painted over, a release that is past its date, or a beacon lashed into the bracket defeats the whole design. Check the mounting as part of the same inspection. The beacon should be upright, clear of obstructions, and mounted where it can float free without hitting a rail or a canopy. A beacon mounted inside a locker is a beacon that will go down with the boat.

Selling, scrapping, replacing

A beacon that leaves your ownership must leave the registration record too. When you sell the vessel or the beacon, update the registration so the new owner is the contact, and make sure the new owner knows the device is registered. When you scrap or dispose of a beacon, update or cancel the registration so that an old identity cannot generate a false alert years later. The same rule applies to a beacon that fails its inspection or reaches the end of its battery life. A dead beacon left in a locker is not neutral equipment; it is an unregistered transmitter that someone may switch on without knowing its history. Replacement is the moment to check the record, not just the hardware. Beacons also have a disposal route. A lithium battery pack is not household waste, and a beacon that is thrown away intact can be activated in a landfill or a transfer station. Remove the battery, follow the local disposal rules, and cancel the registration before the device leaves your hands. Radio procedure for a Mayday on VHF is covered in the VHF and phone article.

Action: make the record part of the kit

Register before the first trip. Enter the beacon ID, owner, vessel and emergency contacts. Validate every two years. Confirm that phone numbers and addresses still reach someone. Log the cancellation numbers. Keep the Coast Guard and Air Force contacts with the beacon ID. Test with the self-test only. Follow the maker's schedule and never run a live activation as a test. Cancel immediately after an accident. Call with the beacon ID rather than switching the device off and hoping. Check the battery and release dates. Replace both on the maker's schedule. Update on sale or disposal. Transfer the record or cancel it.

Mistakes with beacon registration

Assuming the dealer registered the beacon. Leaving an old owner's phone number in the record. Treating a self-test as harmless when it is run incorrectly. Switching off an accidental activation without calling to cancel. Scrapping a beacon while its registration stays active. Keeping the beacon ID only in a phone that travels on the boat. Mounting a float-free EPIRB where it cannot actually float free. Section index: environment index.

Sources

  1. 406MHz Emergency Distress Beacons — NOAA SARSAT · T1
  2. Happy #406Day18 - SARSAT Beacon Awareness Day — NOAA NESDIS · T1
  3. Preventing False Alerts — NOAA SARSAT · T1