Key facts
| Question | Answer |
|---|---|
| Reflection | A hard face returns part of the incident wave energy |
| Angle | The reflected train leaves at roughly the angle it arrived |
| Delay | Extra path length divided by wave speed |
| Typical delay | 10 to 40 seconds for a 100 to 200 m longer path |
| Height | The reflected wave is usually lower than the direct one |
| Shape | The returning train is often steeper and shorter |
| Structure | Smooth vertical faces reflect most; armour dissipates |
| Position | The second arrival moves when the swell direction changes |
The mirror rule and the extra path
The swell had struck a sea wall forty metres to the north, turned, and come back along the shore. One offshore swell, two arrivals, and only one of them was in the forecast. A wave meeting a hard face does not stop. Part of its energy is sent back into the water it came from, and the returning train travels away in a new direction. Where the geometry is simple, the reflected direction is close to the mirror of the incoming direction: the angle between the wave crest and the wall on the way in is matched on the way out. That means one offshore swell can reach a shore position twice. The first arrival is the direct wave. The second is the one that struck the wall and returned, and it arrives from a different direction at a different time. The delay is the extra distance divided by the speed the wave travels. A path 100 to 200 m longer than the direct route, at a shallow-water phase speed of 5 to 7 m/s, puts the second arrival 10 to 40 seconds behind the first. That is long enough for an angler to watch the direct set pass, relax, and then be caught out by the return. Reflection is one of the four processes that reshape a wave between deep water and the shore, alongside refraction, diffraction and breaking. A structure does not absorb all the energy that reaches it, and the returning train is a real wave with its own direction and timing rather than an echo. The proportion returned depends on how abruptly the water meets the structure. A face that rises from deep water at a steep angle reflects strongly because the wave has no time to deform before it strikes. A face fronted by a shallow apron or a wide beach reflects weakly because the wave has already slowed, steepened and partly broken before it arrives. That is why two walls of the same height and material can behave very differently: the one with deep water at its foot returns a coherent train, the one with a shallow shelf in front returns a broken surge.
What the wall gives back is not a copy
The returning wave has lost energy at the wall, partly to turbulence and spray and partly to friction along the face. Its height is usually lower than the direct wave, and its crest is often shorter and steeper because the reflection process mixes frequencies and compresses the crest. That steeper shape matters more than the height loss. A lower but steeper wave carries more of its energy near the surface, breaks more readily on a shallow ledge, and pushes harder against a line or a float. An angler comparing only heights will underestimate it. The period is roughly preserved at a clean vertical face. If the direct sets arrive every fourteen seconds, the reflected sets usually arrive every fourteen seconds too, offset by the path delay. Two rhythms on the same water, separated by a constant interval, are a strong indication that a wall is in play somewhere up-swell.
Structure type decides how much comes back
A smooth vertical sea wall is the cleanest reflector. Its face sends a large fraction of the incident energy back toward the sea, and the returning train is coherent enough to produce a recognisable rhythm. A sloping revetment returns less. The wave runs up the slope, loses energy to friction and turbulence, and comes back down as backwash rather than as a coherent reflected wave. The return is spread over time and arrives at the toe rather than as a distinct train. A rubble-mound breakwater covered in rock or concrete units is designed to dissipate energy in the gaps between the armour. Its reflected train is weaker and more diffuse, but the flow along the toe can still be strong, and that flow can scour the sand or shingle in front of the structure. For fishing, the three structures offer different water. A vertical wall gives a sharp, predictable reflected train that can be used to reach water the direct sea cannot. Armour rock gives a messy, turbulent zone at the toe that holds bait but is hard on tackle and worse to stand on. A revetment gives a broad, shallow surge that is useful for very little except access. Material matters less than geometry. A concrete wall, a steel sheet pile and a rock face cut smooth all behave similarly when the face is steep and the water at the toe is deep. A rough rock face at the same angle destroys the coherence of the returning train even though the material is hard. Judge a structure by its profile and by the depth at its foot, not by what it is built from.
Direction moves the landing point
The reflection point is not fixed to the rock you are standing on. It depends on the swell direction and on the orientation of the wall. When the swell arrives square to the wall, the reflection goes back the way it came and lands close to the direct path. When the swell arrives at an angle, the reflection travels along the wall and lands further down the coast. That is why the same mark can be comfortable one day and washed from behind the next with the height forecast unchanged. The variable is not the size of the sea but its direction relative to the structure. The practical move is to read a chart before choosing a position. Ask where a line from the swell direction would meet a hard face before it reaches your rock. If that face is within a few hundred metres and stands between the swell and the mark, expect a second arrival. If there is no such face up-swell, the mark is receiving only the direct sea.
Timing the retrieve between trains
The second arrival is not only a hazard. On a coast with a long wall, it can push water into a corner that the direct sea never reaches, and that corner can hold fish because it is stirred without being pounded. Time the retrieve to the gap between arrivals. A lure worked just after the first wave passes has a few seconds of relatively settled water before the reflected train arrives. A bait left out through both arrivals is being fished in disturbed water twice as often as the angler assumes. Watch the wall and count. If the direct sets strike the face and the reflected pulses reach the rock a consistent number of seconds later, that interval is the working window, and it holds as long as the period does. When the period lengthens, the window lengthens with it; when a new swell arrives with a different period, the count has to be redone. From a boat the same pattern is easier to map and harder to fish. A reflected train produces a patch of confused, steep water that can be a metre or two high even when the open sea is modest, and it appears in places that a forecast would call sheltered. Running a transducer line across the suspected reflection zone shows the change in surface texture and, often, a change in the sub-surface scattering as the returning wave stirs the bottom. Marking that zone gives a repeatable drift on future trips with the same swell direction, and it warns you where the boat will start to pitch when the sets arrive.
Backwash and standing position
The backwash is the part that catches people. Water that has run up a face or through armour must return, and it returns at the toe, where anglers stand to reach deeper water. The returning flow is strongest just after a set, which is exactly when the next cast is being made. Two rules reduce the risk. Never stand in the drain line at the base of a wall; stand to the side, on higher ground, with a dry route behind. Treat the reflected train as a wave with its own timing, and leave the toe before the interval expires rather than after the water arrives. A vertical wall also produces spray and overtopping that is random in time and volume, so a spell of dry crest records what has already happened rather than forecasting what comes next. The reflected wave is the part you can predict; the overtopping is the part you cannot.
Misreads around a reflecting wall
Choosing a mark by its aspect and ignoring a wall up-swell of it. Comparing heights and ignoring how steep the returning wave is. Assuming a rock breakwater reflects like a vertical wall. Standing at the toe while the backwash returns. Fishing a fixed spot after the swell direction has moved the reflection point. Counting only the direct sets when planning a retrieve. Treating a dry spell at the wall as a safe window.
When the wall has a partner
A single wall gives two arrivals. Two walls facing each other give a series. Energy returning from the first face crosses the channel, strikes the far wall and returns again, so a mark between them receives the direct sea plus echoes at regular intervals. In a harbour arm 150 m wide, each extra crossing adds about 50 seconds at shallow-water speed, and the third or fourth arrival still carries enough energy to move a float. The sign is water that never fully settles between sets. Instead of one quiet window after the direct wave there are two or three progressively weaker pulses, and their spacing matches the width of the channel. Counting them takes a single set. Equal intervals point to a pair of reflecting faces; irregular ones mean a diagonal corner or an angled quay is contributing a return. The retrieve plan has to shrink accordingly. The usable window closes before the first echo rather than before the next set, and it closes sooner as the tide rises and the channel narrows. That is why the same arm feels manageable at low water and continuously agitated an hour later, with no change in the offshore sea.
Related reading
Clapotis at a sea wall Wave diffraction behind a breakwater Swell angle and refraction Environment section index
Sources
- Wave transformation — Coastal Wiki · T2
- Wave overtopping — Coastal Wiki (ENCORA) · T2
- Coastal engineering manual, Part II: coastal hydrodynamics — U.S. Army Corps of Engineers · T1