Swell Decay: Why the Offshore Buoy Overstates the Beach

A buoy 40 km offshore reports 3.5 m at 16 seconds. The beach is ankle-high. Neither instrument is wrong. The buoy is measuring a swell that still has most of its energy, and the beach is receiving the fraction that survived the journey. Between the two lies a chain of losses: the crest spreads, the wind pushes back, the bottom drags, and the shoreline refracts what is left.

currents and sea state
Cover illustration: Swell Decay: Why the Offshore Buoy Overstates the Beach

Key facts

ProcessEffect on the swell
Directional spreadingHeight falls roughly with the square root of distance
Opposing windAdds surface stress and can break the crests
Bottom frictionRemoves energy over a shallow shelf
BreakingRemoves height abruptly on bars and reefs
RefractionCan concentrate or disperse the remaining energy
PeriodChanges much less than height
Buoy depthA shallow mooring reads a transformed sea
Beach heightThe end of the chain, not the start

Energy spreads and height falls

Understanding that chain turns a misleading buoy number into a usable forecast. A storm does not generate a wave from a single point. It generates a field over an area, and the waves radiate outward in all directions. As the field expands, the same total energy is spread over a longer and longer crest. The height falls because the energy per unit length of crest falls. For a source that is small compared with the distance, the height decays roughly as the inverse square root of the distance. Double the distance and the height falls by about 30%; quadruple it and the height falls by half. That is a rough rule, because real storms are not point sources and the decay is modified by wind and swell sorting, but it gives the scale. A storm 1,000 km away can send a swell that is 3 m at the edge of the generation area and 1 m at a beach 1,000 km away. A storm 3,000 km away can send a swell that is 4 m at the source and 0.8 m at the beach. The longer distance does not just reduce the height; it also narrows the range of directions that reach the beach, because the swell has had more time to spread. The decay is not uniform across the spectrum. The long components travel faster and spread more slowly, so they retain a larger share of their height. The short components decay faster and are more affected by wind. That is why a distant swell is often cleaner and longer-period than a nearby sea, even though it is smaller.

Directional spread

A swell field spreads in direction as well as in distance. The waves that leave the storm at a slight angle to the beach-bound path travel farther and arrive later. The waves that leave at a larger angle may never reach the beach at all. The result is a beam of swell that is narrower than the original storm but still has a range of directions. The directional spread affects the height at the beach. A narrow beam concentrates the energy, so the beach receives a larger height. A wide beam spreads the energy, so the beach receives a smaller height. Two swells with the same offshore height can produce different beach heights if their directional spreads are different. The spread also affects the surf. A narrow beam produces sets that arrive from nearly the same angle, with clean lines and a consistent break. A wide beam produces sets that arrive from different angles, with a more confused surface and a less predictable break. The width of the beam is visible in the variation of the set direction. The spread is difficult to measure without a directional wave buoy. A standard buoy reports a dominant direction and a spread parameter, but the parameter is often overlooked. If the spread is wide, the beach height is likely to be lower than the offshore height suggests. If the spread is narrow, the beach height is likely to be closer to the offshore value.

Opposing wind

A local wind blowing against a swell removes energy from the crests. The wind stress creates short, steep chop that opposes the swell, and the two wave systems interact. The swell can be slowed, steepened and broken by the wind sea, and the height at the beach can fall. The effect is strongest when the wind is strong and the swell is weak. A 20 knot headwind can destroy a 0.5 m swell within a few hours, because the wind sea is larger than the swell and the two systems are not coherent. A 20 knot headwind has less effect on a 3 m swell, because the swell is still the dominant signal, but it can add chop that makes the surface rough. The wind also changes the direction. A strong headwind can push the swell back and refract it, so the angle at the beach is different from the offshore angle. The wind sea can dominate the surface, and the swell can be hidden under the chop. The beach can look rough while the swell is still present but masked. A following wind has the opposite effect. It adds energy to the swell and can increase the height at the beach, especially if the wind is aligned with the swell direction. A following wind can also flatten the surface, because the wind sea is moving with the swell and the two systems are more coherent.

Bottom friction and breaking

The shelf is the last filter. As the swell crosses the continental shelf, it feels the bottom, and the bottom removes energy through friction. The loss is small in deep water and large in shallow water, especially over a wide, rough shelf. A swell crossing a shelf 200 m deep loses little energy. A swell crossing a shelf 50 m deep loses more, because the wave is in contact with the bottom for a longer distance. A swell crossing a shelf 20 m deep can lose most of its energy before it reaches the beach, especially if the bottom is rough or covered with sediment. Breaking is the most abrupt loss. A crest that collapses on an outer bar gives up its height at once, and the wave that re-forms inside the bar is smaller. A wave that breaks on a reef can lose most of its height in a few metres. The beach receives the reformed wave, not the original swell. The shelf also changes the period. A wave that shoals and breaks can reform with a shorter period, because the long components are removed and the short components are amplified. The period at the beach can be shorter than the period at the buoy, even though the swell has not changed in deep water.

The buoy is not the beach

A buoy measures the sea at its mooring, not at the beach. The difference is the transformation between the two points, and the transformation is the sum of spreading, wind, bottom friction and breaking. A buoy in deep water is an offshore measurement; a buoy in shallow water is already a transformed measurement. The depth of the mooring is the first thing to check. A buoy in 200 m is measuring a sea that the bottom has not affected. A buoy in 50 m is measuring a sea that has already begun to shoal. A buoy in 20 m is measuring a sea that has already lost energy to the bottom. The same height at two different moorings can mean different things. The distance from the beach is the second thing to check. A buoy 10 km offshore is close enough that the beach height may be similar. A buoy 100 km offshore is far enough that the beach height may be much lower. The transformation is a function of distance, and the distance changes the interpretation. The third thing to check is the direction. A buoy that is exposed to the swell may report a large height, while a beach that is sheltered by a headland may receive a small height. The buoy direction and the beach orientation have to be compared before the height can be used.

Reading decay at the buoy

A falling height with a stable period is a sign of decay. The swell is spreading and losing height, but the period is preserved. A falling height with a falling period is a sign that the short components are decaying faster than the long ones, or that the swell is being replaced by a local sea. A rising height with a stable period is a sign of a new swell arriving. The long components are arriving first, and the height is building. A rising height with a rising period is a sign of a growing sea, either local or remote. The pattern of height and period together tells you which process is dominant. The direction is the third variable. A stable direction with a falling height is a sign of decay along the same path. A changing direction with a stable height is a sign of a new source or a change in the wind. A direction that rotates slowly is a sign of a swell field that is spreading. A time series is more useful than a single reading. A buoy that reports 3.5 m at 16 seconds and then 2.5 m at 15 seconds a day later is telling you that the swell is decaying. A buoy that reports 1.5 m at 8 seconds and then 3.5 m at 16 seconds is telling you that a new swell has arrived. The trend is the signal, not the snapshot.

Refraction can restore height

Decay is not the only process. Refraction can concentrate the remaining energy at a favoured point, raising the height above what the surrounding beach receives. A point, a reef or a channel can focus the swell, and the focused height can be larger than the offshore height would suggest. The focusing is strongest when the swell direction is aligned with the topography. A swell that arrives parallel to a ridge can be refracted toward the ridge crest, and the height can increase. A swell that arrives at an angle can be refracted away, and the height can decrease. The same swell can produce a big wave at one mark and a small wave at another. The focusing is also frequency-dependent. The long components are refracted more than the short ones, so a point can receive a long, clean swell while the surrounding beach receives a short, choppy sea. A point break that works on a day when the adjacent beach is flat is usually showing this effect. The practical rule is to check the chart for focusing features before you write off a swell. A buoy that reports 1.5 m can produce a 2 m wave at a point if the refraction is strong. A buoy that reports 3.5 m can produce a 0.5 m wave at a beach if the refraction is unfavourable. The chart is the link between the two.

Planning with decay

Use the buoy height as an upper bound. The beach height is the buoy height minus the losses, and the losses are larger when the buoy is far offshore, the wind is opposing and the shelf is shallow. A 3.5 m buoy reading can mean a 2 m beach or a 0.5 m beach, depending on the path. Use the period as a persistence clue. A long period survives the journey better than a short one, so a 16-second swell is more likely to reach the beach than an 8-second sea of the same offshore height. If the buoy reports a long period, the swell has a better chance of arriving. Use the direction as a filter. A swell that is aligned with the beach is more likely to arrive than a swell that is oblique. A swell that has to cross a headland or a shallow bank is more likely to be reduced. The direction tells you which losses to expect. Use the tide as the final gate. A swell that is small at low water can be invisible at high water, and a swell that is invisible at low water can break on the bar at high water. The tide changes the depth over the shelf and the bars, and the same swell can produce a different beach at each stage. The final check is visual. A beach that looks flat can still have a long swell passing through, and a beach that looks rough can be a local wind sea with no swell. Read the period at the beach, look for long lines through the chop, and compare the observed height with the buoy. After a few sessions, the local transformation becomes predictable, and the buoy number becomes a starting point rather than a verdict.

Sources

  1. Shallow-water wave theory — Coastal Wiki · T2
  2. Waves (JetStream) — NOAA · T1
  3. Wave transformation — Coastal Wiki · T2