Key facts
| Constituent | Period | Speed | What it does |
|---|---|---|---|
| M2 | 12.42 h | 28.984°/h | Principal lunar semidiurnal; the main twice-daily signal |
| S2 | 12.00 h | 30.000°/h | Principal solar semidiurnal; beats against M2 |
| K1 | 23.93 h | 15.041°/h | Lunisolar diurnal; splits successive highs |
| O1 | 25.82 h | 13.943°/h | Lunar diurnal; deepens the daily inequality |
| N2 | 12.66 h | 28.440°/h | Lunar elliptic; modulates range over 27.55 days |
| Daily slip | 50 min | — | Mean interval set by the lunar day |
| Spring-neap | 14.77 d | — | Beat between M2 and S2 |
A tide record is a sum of waves
It also tells you, before you leave the house, whether a mark will run a clean twice-daily rhythm or a lopsided pair that changes the plan. Harmonic analysis takes a long water-level record and fits it with sine waves of known astronomical period. Each wave gets an amplitude and a phase at that station: how much the water rises because of that forcing, and how late it arrives relative to the theoretical equilibrium tide. Add the fitted waves together and the predicted curve reproduces the observed record closely enough to publish years ahead. The method works because the forcing is periodic. The moon and sun move on orbits that repeat with known periods, so the tide-generating force can be decomposed into components at those periods. The station-specific part is the response: a bay amplifies some components, a shallow estuary distorts others, and a constricted entrance delays all of them by different amounts. The practical consequence is that a tide table is a local fit, not a global formula. The same constituents are present everywhere, but their amplitudes and phases differ at every gauge, which is why a prediction cannot be shifted to another port by a fixed offset.
The four constituents that carry the signal
M2 is the principal lunar semidiurnal wave, with a period of 12.4206 hours and a speed of 28.984 degrees per hour. It dominates most open coasts and produces the familiar two highs and two lows. S2 is the principal solar semidiurnal wave, with a period of exactly 12.0000 hours and a speed of 30.000 degrees per hour. It is the solar counterpart of M2 and slightly faster. K1 and O1 are the diurnal pair. K1 is lunisolar, with a period of 23.9345 hours and a speed of 15.041 degrees per hour. O1 is lunar, with a period of 25.8193 hours and a speed of 13.943 degrees per hour. Their amplitudes tilt the two daily highs away from equality, and their presence is what turns a semidiurnal coast into a mixed one. A station record also contains smaller terms: N2, the lunar elliptic wave at 12.6583 hours, which modulates the range over the 27.55-day anomalistic month; P1 at 24.0659 hours; and shallow-water overtides such as M4, which sharpen the curve in estuaries. The four principal terms explain most of the pattern an angler needs. Shallow-water overtides deserve a note because they change the shape of the day rather than its scale. M4 has half the period of M2, about 6.21 hours, and it grows as the tide wave steepens in shallow water. A strong M4 produces a curve with a fast rise, a long stand and a rapid fall, which is why an estuary can hold a high-water stage for two hours and then drain a flat in forty minutes. The table's heights are still correct; the shape between them is not a sine. The age of the tide is the last useful term. The spring range typically arrives a day or two after syzygy because the ocean takes time to respond to the forcing and because the various constituents do not peak together. The lag is local, and it is one reason a moon-phase calendar and a tide table disagree about which day carries the biggest range.
The fifty-minute slip is a beat, not a metronome
The lunar day is about 24.84 hours, not 24.00. The moon returns to the same position over the coast roughly 50 minutes later each solar day, and the M2 wave follows that schedule. That is the origin of the familiar rule that high tide is about an hour later tomorrow. The exact interval is a station property. A record dominated by M2 shows close to 50 minutes. A record with a strong K1 or O1 component can show a different interval, because the diurnal waves do not keep the same schedule as the semidiurnal pair. Over several days the difference accumulates, so a table reused with a fixed 50-minute shift drifts away from the real turn. The slip also runs the other way in the arithmetic. Between two successive high waters the interval is about 12 hours 25 minutes, not 12 hours, and the second high of the day therefore falls later and later in the afternoon as the week advances. A week of planning can be built on that single interval.
Spring-neap is a fourteen-day beat
M2 and S2 have nearly the same period but not quite. Adding two waves of slightly different frequency produces an amplitude that rises and falls at the difference frequency. The beat period between M2 and S2 is about 14.77 days, which is half of the spring-neap cycle. The full cycle from spring to spring is therefore about 29.5 days, one synodic month. When the sun and moon line up at syzygy, the two semidiurnal amplitudes add. At quadrature they act at right angles and partly cancel. The range grows at alignment and shrinks at the quarters, and the maximum does not always fall exactly on the date of new or full moon. The fitted curve lags the astronomical alignment by a day or two, and perigee or apogee can shift the peak further. The constituent view explains why the envelope is smooth rather than a series of isolated spikes. The range does not jump on full-moon day and collapse the next. It swells and contracts over several days, and the usable windows move with it.
Declination and distance reshape the pair
The moon's orbit is inclined about 5 degrees to the ecliptic, which is itself inclined 23.4 degrees to the equator. As the moon circles the earth it crosses the equator twice a month and reaches maximum north or south declination in between. When declination is high, the two daily tidal bulges pass at different distances from the observer's latitude, and the two highs come out unequal. K1 and O1 carry most of that inequality. Distance adds a second modulation. The moon's orbit is elliptical, with perigee near 356,500 km and apogee near 406,700 km. The tide-raising force varies as the inverse cube of distance, so a perigean new or full moon produces a larger range than an apogean one. The difference at high water can exceed a foot at many stations and more at high-range ports. Neither effect appears in a moon-phase calendar. A full moon near apogee can produce a smaller spring than a full moon near perigee, and the two can differ by a noticeable amount on a shallow flat. The predicted height at the gauge already contains both terms, which is why the height column is more useful than the phase symbol.
Phase and amplitude belong to the station
The same M2 wave arrives at different times along a coast, and that phase difference is what makes the tide propagate from one headland to the next. Two ports 50 km apart can have high water separated by tens of minutes because their M2 phases differ, not because one table is wrong. Amplitude varies for the same reason. A bay can amplify a constituent through resonance while the adjacent open coast does not. The result is that the same day brings a large range in one harbour and a modest range outside it, even though both are driven by the same astronomical forcing. Comparing the two without checking their datums adds a second error. This is the case for using the station's own prediction and its own constants. A neighbouring port's times plus a guessed offset is one of the most common avoidable errors in trip planning, and the error grows over a multi-day trip as the phase difference accumulates.
Reading constants before a trip
If a station publishes harmonic constants, the ratio between the diurnal and semidiurnal terms tells you what kind of day to expect. The standard form factor is the sum of K1 and O1 amplitudes divided by the sum of M2 and S2 amplitudes. Values below 0.25 indicate a semidiurnal tide with two similar highs. Values between 0.25 and 1.5 indicate a mixed tide. Values above 1.5 indicate a diurnal or strongly mixed regime with one dominant high. The M2 amplitude alone gives the scale of the range. A large M2 means a strong twice-daily signal and a fast current response. A large K1 relative to M2 means the two highs will differ enough that the weaker one may not clear a sill or flood a flat, and the plan has to choose between them. Check the N2 amplitude if you are planning around a spring. A strong N2 modulates the range over the anomalistic month and can split what looks like one spring peak into two unequal ones. The table's height column shows the result even when the constants are not published.
What the constituent view changes in practice
The tide table already contains the sum, so the constituents are not needed to read tomorrow's high. They are needed to know why a pattern repeats, and to decide whether a difference between two stations is phase, amplitude or both. When a mark fishes well for a week and then stops, check whether the change matches the spring-neap beat rather than assuming the fish moved. When two highs appear on the table, check whether the M2 and K1 amplitudes predict a large inequality before planning around the second one. When a station's high water drifts by more than an hour from the previous day, suspect a strong diurnal component rather than a bad table. The final check is the one that governs the trip. Read the predicted heights at the mark's own gauge for the day you will fish, compare the range with the depth the mark needs, and treat the phase name as background. The constituents explain the pattern; the height column decides the plan.
Sources
- Harmonic Constituents — NOAA Tides and Currents · T1
- Tides and Currents Glossary — NOAA Tides and Currents · T1
- Tides — NOAA JetStream · T1
- Our Restless Tides, Chapter 4: Tidal Inequalities — NOAA Tides and Currents · T1