Tidal Range: Why Some Bays Amplify the Tide

The same moon pulls on every coast, yet one harbour rises sixteen metres while another a few hundred kilometres away rises less than two. The difference is not astronomy and it is not latitude. It is the shape of the water body and how that shape answers a wave with a period near 12.42 hours.

tides
Cover illustration: Tidal Range: Why Some Bays Amplify the Tide

Key facts

QuestionAnswer
Fundy rangeAbout 16 m at the head, among the largest in the world
Resonance conditionBasin length near one quarter wavelength of the tide
Fundy lengthRoughly 270 km, close to the M2 quarter wavelength
ConvergenceA narrowing plan form raises the range upstream
DepthShallower water slows and steepens the wave
Local spreadHead, mouth and side coves can differ substantially
Planning ruleUse the gauge inside the basin, not a regional average

Range is a basin response

Length selects the resonant response, width controls how much the flow is squeezed, and depth sets both the speed of the wave and the friction that damps it. Read those three properties before trusting a regional range figure, and choose the mark whose gauge sits inside the same basin geometry. The astronomical tide is a forcing, not a height. The forcing sets the period and supplies energy, while the basin decides how much of that energy accumulates at a particular shore. An open coast with a wide shelf and no confinement produces a modest range. A semi-enclosed sea, a funnel-shaped estuary or a bay with a narrow entrance can multiply the same forcing several times over. NOAA's education material makes the point directly: the shape of the coastline and the topography of the sea floor modify the tide, and funnel-shaped bays can change its magnitude dramatically. The Bay of Fundy is the standard example, with a range that reaches about 16 m at the head. That figure is not an astronomical exception. It is a basin doing what its dimensions tell it to do. The practical translation is that a range figure belongs to a gauge, not to a sea area. A statement that "the tide here runs about two metres" is an average over a coast that may contain a resonant bay, a sheltered lagoon and an exposed shore. The average is fine for a weather summary and useless for deciding whether a rock platform will be dry at noon.

Resonance sets the scale

A tide entering a long, semi-enclosed bay behaves like a wave in a channel. If the basin's natural oscillation period is close to the tidal period, the incoming and reflected waves reinforce each other and the range at the head grows. This is resonance, and it is the dominant reason some bays carry far larger tides than the open coast beside them. For a closed-end channel, the fundamental resonance occurs when the length is about one quarter of the wavelength of the wave. Take the M2 period of 12.42 hours and a mean depth of 70 m. The shallow-water wave speed is the square root of gravity times depth, about 26 m/s, and the wavelength is speed times period, near 1,170 km. One quarter of that is about 290 km. The Bay of Fundy is roughly 270 km long, close to the quarter-wavelength condition. The fit is not exact, the depth varies along the bay, and the connection to the Gulf of Maine adds a second resonant system, but the order of magnitude explains why the response is so large rather than merely noticeable. A shorter bay tunes to a shorter period and may respond more to a different constituent or to a storm surge. A longer bay may respond at a subharmonic. The response curve is broad, so a basin does not need an exact match to amplify strongly. A natural period within a few hours of the tidal period still produces a large gain, which is why several large-range estuaries exist at similar but not identical lengths. Mean depth carries the arithmetic, and it has to be estimated rather than read. Sample soundings along the basin axis at intervals and average them. The square root in the wave-speed formula means a ten per cent error in depth moves the resonant length by about five per cent, which at 290 km is roughly 15 km. A bay that is much deeper at the mouth needs a depth-weighted estimate, because the wave spends most of its travel in the deeper half.

Convergence does the visible work

Resonance is only one term. As a funnel-shaped bay narrows, the same volume of water must pass through a smaller cross-section. The tidal current accelerates, the wave steepens, and the vertical range grows at the head even before resonance is counted. The effect scales with the ratio of entrance width to head width. A bay that narrows from ten kilometres at the mouth to one kilometre at the head concentrates the flow tenfold, and the range rises accordingly. That is why the upper reaches of an estuary can show a bigger tide than the open water outside, and why the current at the throat can run hard while the range looks moderate. Convergence also explains why the phase and the range do not change together. The narrowing raises the amplitude, while friction and reflection delay the wave. A mark near the head can therefore run a larger range and arrive later than a mark at the mouth, and the two differences are independent.

Depth changes both speed and shape

Shallow water slows the tide wave, and a slower wave has a shorter wavelength for the same period. That shifts the resonant length and can bring a basin into tune with a different constituent. It also increases bottom friction, which damps the response and distorts the curve. The distortion is visible in the shape of the day. In deep water the tide approximates a sine. In shallow water the rising tide outruns the falling tide, or the reverse, and the high-water stand lengthens while the low-water turn sharpens. Shallow embayments can even produce a double high, where the crest passes and a reflected wave produces a second, smaller peak before the water falls. The combination of convergence and friction explains why two bays with similar lengths can carry very different ranges. One may be wide and deep, the other narrow and shallow, and the second will generally show the larger and more distorted tide. It also explains why a dredged channel or a land reclamation project can change the local range over years rather than centuries.

Why Fundy reaches sixteen metres

The Bay of Fundy combines all three terms. It is long enough to sit near the quarter-wavelength resonance of the M2 tide, it narrows toward the head, and its connection to the Gulf of Maine forms a coupled system that extends the effective length of the resonator. The upper bay also shoals, which steepens the wave and adds friction that shapes the curve. The result is a range near 16 m at the head on a large spring, with currents to match. The same forcing produces roughly two metres on the open Atlantic coast of Nova Scotia, a short distance away. Nothing about the moon differs between the two shores; the geometry does. Other large-range systems follow the same recipe. The Bristol Channel and Severn Estuary combine a funnel with a resonance tuned close to the semidiurnal period, producing a mean spring range above 12 m at Avonmouth. Cook Inlet in Alaska combines a long, narrowing basin with a large tidal prism and produces some of the strongest tidal currents in North America. Each is a local answer to the same forcing.

Local gradients matter more than the basin average

Within one bay, the head usually carries a larger range than the mouth, and a side cove can differ in phase as well as amplitude. Two coves that look similar on a chart can behave differently because one connects through a narrow channel and the other opens directly to the main body. Corange charts make the gradient visible. A corange line joins places with equal tidal range, and the spacing between lines shows how fast the range changes over distance. Tightly spaced lines mark a steep gradient, where a short move changes the water height substantially. That spacing is more useful to an angler than the absolute numbers, because it tells you how far a borrowed prediction can be trusted. Cotidal charts add the phase. A place where both range and phase change quickly over a short distance is exactly where a station-specific prediction becomes essential. A place where the lines are widely spaced tolerates a nearby gauge. Two gauges inside one basin answer the amplification question without a chart. Compare the range at the head with the range at the mouth on the same tide. A ratio near one means the basin is passing the ocean tide through; a ratio of two or more means it is building its own. The ratio holds across the cycle even as both heights grow at spring, which makes it a more durable planning figure than either number alone. Where the head gauge has a shorter record, the days it shares with the mouth gauge are enough to fix the ratio.

What a large range changes on the water

A large range compresses the usable stages into shorter periods and makes the plan depend on the stage rather than the day. A low-water route that works at one stage may be dry for hours, and a high-water mark that looks safe may be cut off before the fishing is finished. The bigger the range, the narrower the window in which a specific mark works. Currents grow with the range because the volume of water moving through the same cross-section increases. In a convergent bay the flow can run hard even when the vertical range looks moderate, which matters for anchoring, drift speed and the safety of a small boat near the entrance. A spring tide in a funnel is not simply a higher tide; it is a faster one. Swell adds a term the tide table does not contain. A long-period swell entering a funnel can amplify at the head in the same way the tide does, producing a surge or a standing wave. That is a sea-state question, and it is the reason a calm forecast can still produce an uncomfortable day inside a narrow bay.

Reading the range before choosing a mark

Start with the gauge nearest the water you will fish and check whether it sits inside the basin or outside it. A gauge outside the entrance describes the ocean tide, not the amplified tide at the head. If the nearest gauge is outside, treat the difference as unknown rather than zero. Compare the predicted range with the depth the mark needs. A mark that requires two metres of water over a sill is a different proposition on a 1.2 m neap than on a 4 m spring, and the gauge's height column answers that question directly. The phase name does not. Finally, check the gradient. If the corange lines are tight between your launch point and the mark, plan around one station and do not extrapolate. If they are loose, a nearby gauge is a reasonable proxy, provided the datum and the time zone match. The geometry decides the range; the gauge reports it.

Sources

  1. What Affects Tides in Addition to the Sun and Moon? — NOAA Ocean Service Education · T1
  2. Tides — NOAA JetStream · T1
  3. Tides and Currents Glossary — NOAA Tides and Currents · T1
  4. Tidal Glossary — Permanent Service for Mean Sea Level · T2