Key facts
| Feature | Typical scale |
|---|---|
| Width | About 10–50 km |
| Length | About 50–200 km |
| Temperature anomaly | 2–5°C colder than surrounding water |
| Ekman transport | About 90° to the right of the wind in the northern hemisphere |
| Surface expression | Cold core, warm edge, sharp front |
| Productivity | High chlorophyll along the filament |
| Response to wind | Builds over hours to days, decays when the wind relaxes |
| Fishing zone | The warm edge and the front, not the cold core |
Wind pushes water, the sea pulls up the rest
Read the shape and the edge, and the fishing becomes a drift along a moving boundary rather than a search over empty water. Upwelling begins with the wind. When the wind blows along a coast, it pushes the surface water offshore through Ekman transport. In the northern hemisphere, the transport is about 90° to the right of the wind, so a wind blowing parallel to the coast with the coast on the left pushes surface water offshore. The water that leaves the coast has to be replaced, and the replacement comes from below. The upward movement is slow, on the order of metres per day, but it is persistent. Cold, nutrient-rich water rises from the shelf break and the slope, and it reaches the surface where the offshore transport is strongest. The result is a band of cold water along the coast, with a temperature anomaly of 2–5°C relative to the surrounding sea. The upwelling is not uniform along the coast. Headlands, capes and changes in the coastline shape the offshore transport, and the cold water tends to organize into filaments. A filament is a narrow tongue of cold water that extends offshore, often from a cape or a headland. The filament is the structure that carries the cold water and the nutrients away from the coast and into the open sea. The filament is also a transport path. It carries plankton, larvae and nutrients offshore, and it creates a gradient between the cold, rich water and the warm, stratified water beside it. That gradient is the fishing feature.
The filament shape
A filament is narrow and long. Typical dimensions are 10–50 km wide and 50–200 km long, although larger and smaller features occur. The shape is set by the coastline, the wind field and the offshore transport, and it can persist for days or weeks if the wind continues. The filament has a cold core, a warm edge and a transition zone. The core is the coldest water, often 2–5°C below the surrounding sea. The edge is the boundary between the cold water and the warmer water, and it can be sharp on one side and diffuse on the other. The sharp edge is usually the one that faces the prevailing current, because the current is compressing the gradient. The filament also has a vertical structure. The cold water is not a uniform column; it is a lens that thins toward the edges. The thermocline is shallow in the core and deeper at the edges, and the nutrient concentration is highest in the core. The vertical structure affects the fishing: a lure that is trolled at the surface may pass over the fish, while a lure that is fished deeper may be in the productive layer. The filament moves. It can drift with the wind and the current, and it can change shape as the wind shifts. A filament that is 20 km wide in the morning can be 10 km wide in the afternoon, and the edge can move several kilometres. The movement is the reason a fixed mark can be productive one day and empty the next.
Temperature and colour
The cold core is visible in a satellite sea-surface temperature image as a dark or blue ribbon. The warm edge is visible as a sharp gradient, often with a band of intermediate temperature. The colour image, which shows chlorophyll, often shows a green ribbon along the same feature, because the cold water is rich in nutrients and the phytoplankton respond. The temperature and colour are not always aligned. The coldest water can be relatively clear, because the phytoplankton bloom is at the edge rather than in the core. The greenest water can be at the edge, where the nutrients and the light are both available. That is why the edge is often the most productive part of the filament, even though the core is the most dramatic. The surface temperature is also affected by the wind and the sun. A cold filament can be warmed at the surface during a calm, sunny day, and the surface expression can weaken even though the cold water is still below. A strong wind can mix the surface and make the filament more visible, or it can destroy the surface expression entirely. The satellite image is a snapshot, not a permanent map. The colour image can be misleading in shallow water. Near the coast, the chlorophyll signal can be dominated by resuspended sediment or by coastal blooms, and the filament can be hard to distinguish. The temperature image is usually more reliable for locating the feature, and the colour image is more useful for identifying the productive edge.
The warm edge and the front
The warm edge is a front: a boundary between two water masses with different temperature, salinity and density. Fronts are convergence zones, where surface water sinks and floating material collects. The convergence concentrates plankton, weed, foam and bait, and the bait attracts predators. The front is often visible as a colour break, a streak of foam or a sudden change in surface texture. The cold water is usually greener or darker, and the warm water is usually bluer or clearer. On a calm morning with the sun behind you, the seam can be followed with the naked eye for hundreds of metres. The front also has a vertical structure. The cold water is denser, so it tends to sink beneath the warm water at the boundary. The sinking motion carries surface material downward, and the convergence is strongest at the surface. That is why the foam and the bait collect at the front, and why the fish are often feeding at the boundary rather than in the core. The front can be stable or unstable. A stable front persists for days and produces a consistent fishing mark. An unstable front breaks into eddies and filaments, and the fishing becomes a search for the remaining pieces. The stability depends on the wind and the current, and it can change within a day.
Fishing the gradient
The warm edge is the first place to fish. Troll or drift along the boundary, keeping the lure in the transition zone rather than in the cold core or the warm water. The fish are often oriented along the front, facing the direction of the current, and a lure that moves along the front is seen side-on and is more likely to be taken. The cold core is the second place. Fish that are feeding on the plankton in the cold water can be spread across the core, especially when the front is weak. A lure that is trolled through the core can pick up these fish, but the strike rate is usually lower than at the edge. The core is also colder, and the fish may be less active. The warm side is the third place. Fish that are avoiding the cold water can hold in the warm water just outside the front, and a lure that crosses from warm to cold can trigger a strike. The warm side is often the best place to start a drift, because the boat can move from the warm water into the front and cover the transition. The depth matters. The front is a surface feature, but the fish can be holding below it. A lure that is trolled at the surface may miss the fish that are feeding at the thermocline. A downrigger or a weighted lure can put the presentation at the depth where the temperature and the bait are both suitable.
Wind relaxation and the bite window
Upwelling is driven by the wind, and the fishing often improves when the wind relaxes. The relaxation reduces the offshore transport, the cold water stops rising, and the front becomes more stable. The bait that was being carried offshore can settle, and the fish can feed more efficiently. The relaxation window is often the best time to fish. The sea is calmer, the front is more visible, and the fish are less dispersed. The window can last from a few hours to a day, depending on the wind cycle. A forecast that shows a relaxing wind after a period of upwelling is a signal to plan a trip. The opposite is also true. A strong wind during upwelling can make the sea rough and the front diffuse, and the fishing can be poor. The cold water is still there, but the surface is mixed and the bait is dispersed. The wind is the switch that turns the feature on and off, and the fishing follows the switch. The wind direction matters. A wind that is parallel to the coast produces upwelling; a wind that is onshore produces downwelling and pushes the cold water offshore. A shift from alongshore to onshore can shut down the upwelling within hours. A shift back can restart it. The direction is as important as the strength.
Cold water safety
Upwelling brings cold water to the surface, and the water can be 2–5°C colder than the surrounding sea. That is enough to cause cold shock if a person enters the water unexpectedly, and it is enough to reduce survival time. Dress for the water temperature, not the air temperature, and carry a means of communication. The cold water also affects the weather. A cold sea can stabilize the lower atmosphere and produce fog, especially when the air is warm and humid. The fog can reduce visibility quickly, and a boat that is offshore can lose sight of land. Carry a compass and a GPS, and be prepared to navigate in low visibility. The cold water can affect the engine and the equipment. A sudden drop in sea temperature can cause condensation and electrical problems, and the cold can reduce battery performance. Check the engine and the electronics before a trip into an upwelling zone, and carry spares.
Reading a satellite image
A sea-surface temperature image is the best tool for locating a filament. Look for a cold ribbon extending offshore from a cape or a headland, with a sharp edge on one side. The image is usually a few hours old, so the feature has moved; use the image as a starting point, not a precise map. Compare the temperature image with the colour image. The colour image shows the chlorophyll, which is a proxy for the phytoplankton. A green ribbon along the cold edge is a sign of a productive front. A green patch in the cold core is a sign of a bloom that may be older or more dispersed. Check the wind history. A filament that is visible in the image was produced by a wind that was blowing along the coast for hours or days. If the wind has changed since the image, the filament may be decaying or moving. The wind history is the key to interpreting the image. Check the tide and the current. A filament can be pushed by the tidal current, and its position can change within hours. A feature that is 20 km offshore in the image can be 30 km offshore by the time you arrive. Use the image to choose the area, and use the boat to find the edge.
Sources
- Upwelling — NOAA Ocean Service · T1
- Ekman transport — NOAA Ocean Service · T1
- Upwelling — Coastal Wiki · T2