The Wave Spectrum: Reading Two Peaks on One Forecast

The offshore buoy reported 2.4 m at 9 seconds. The beach forecast said 0.8 m. The angler drove to the beach, found knee-high surf, and concluded that the buoy was wrong. It was not. The buoy was measuring a sea with two separate trains in it, and the forecast was describing the part that would actually reach the sand. A single height and period cannot describe that sea.

currents and sea state
Cover illustration: The Wave Spectrum: Reading Two Peaks on One Forecast

Key facts

QuantityMeaning
Significant heightAverage of the highest third of waves
Peak periodPeriod carrying the most energy
Wavelength formulaPeriod squared × 1.56, in metres
9 s waveWavelength near 126 m, shoals near 63 m
16 s waveWavelength near 400 m, shoals near 200 m
Two peaksWind sea and swell in the same sea
Spectral windowOften 20–30 minutes of record
Directional spreadRange of angles carrying energy

One height hides several trains

A spectrum can, and a spectral forecast is the difference between driving to a beach that is flat and driving to one that is working. The sea surface is a superposition of many wave components. Each component has its own height, period and direction, and each was generated by a different combination of wind speed, duration and fetch. A storm does not produce one uniform wave train. It produces a range, and the range spreads as the waves travel away from the generation area. A single wave height is a summary of that range. The familiar significant wave height is the average of the highest third of the waves in a record, not the tallest wave and not a guarantee that every wave is that size. A 2.4 m significant height implies occasional waves well above 3 m, and a 1.0 m significant height still contains the occasional 1.5 m wave. The summary is useful for comparing days, but it hides the structure that decides what happens at the beach. Period is the first piece of hidden structure. A train of 6-second waves and a train of 14-second waves can carry the same energy but behave very differently in shallow water. The 6-second train reaches the beach almost unchanged, breaking in the last few metres with a sharp, irregular face. The 14-second train has crossed the shelf, bent with the contours and arrived as a rounder, more orderly line. Direction is the second piece. Two trains of the same height and period can arrive from different angles, and a coast that is exposed to one may be sheltered from the other. A single direction in a forecast is usually the direction of the dominant train, not the direction of every train in the sea.

What the spectrum plots

A wave spectrum is a graph of energy against frequency or period. The horizontal axis is period, usually running from short on the left to long on the right. The vertical axis is energy density, which is a measure of how much wave energy sits in each period band. A peak in the curve marks a period that carries a disproportionate share of the energy. A spectrum can also be directional. A directional spectrum plots energy against both period and direction, producing a surface with ridges and peaks. A narrow ridge means the energy arrives from a narrow range of angles. A broad ridge means it arrives from a wide range. The directional spread is as important as the peak period when you are choosing between an exposed point and a sheltered bay. The shape of the spectrum tells you the history of the sea. A young wind sea has a single, broad peak at a short period and a wide directional spread. A mature swell has a narrow peak at a long period and a narrow spread. A mixed sea has two peaks, one for each train, and the relative heights of the peaks tell you which train dominates. The spectrum is a statistical description over a time window, usually 20–30 minutes. It describes the average energy in that window, not the sequence of individual waves. A spectrum can be stable while the sets come in groups, and it can be smooth while the surf is erratic. Read the spectrum for the trend, and read the water for the sequence.

The two-peak signature

A two-peak spectrum is the most common source of confusion. One peak sits at a short period and represents the local wind sea. The other sits at a long period and represents swell from a distant storm. The buoy reports a significant height that combines both trains, but the beach does not respond to both equally. The short sea is steep and breaks on the outer bar. The long swell is low and passes over the bar to break closer to shore. If the short sea is large and the swell is small, the buoy height can be dominated by a train that never reaches the beach. The beach sees the swell, and the swell is small. That is the opening scene: 2.4 m at 9 seconds offshore, 0.8 m at the beach, and both numbers correct. The reverse case is more dangerous. A large long-period swell combined with a small wind sea produces a buoy height that looks moderate, but the swell carries more energy and breaks harder. A 2.0 m significant height with a 16-second peak can produce a beach break that is bigger and more powerful than a 3.0 m height with a 7-second peak. The period, not the height, sets the energy. The secondary peak also tells you what else is in the water. A short secondary peak means chop and whitecaps even when the primary swell is clean. A second long peak from a different direction means a confused sea with sets arriving from two angles. A broad shoulder on the primary peak means the swell is spread over a range of periods and will produce a less consistent break.

Period decides where the wave feels bottom

A deep-water wave first notices the seabed when the water is about half as deep as one wavelength. Wavelength itself is set by period: square the period, multiply by 1.56, and read the result as metres. A 9-second wave is about 126 m long, so shoaling starts near 63 m of depth. A 16-second wave is about 400 m long, so shoaling starts near 200 m. That difference explains why the same offshore height produces different surf at different beaches. A long swell starts to refract and shoal far offshore, over a distance of kilometres. It arrives at the beach with a direction and height that have been shaped by the whole shelf. A short sea starts to shoal close to shore, over a distance of hundreds of metres, and arrives with a direction and height that are closer to the offshore values. The period also sets the breaking depth. A wave breaks when its height becomes a fixed fraction of the water depth, roughly 0.8 in shallow water. A long swell that has shoaled to 2.5 m breaks in about 3 m of water, which may be on the outer bar. A short sea of the same deep-water height may break in 1.5 m, which may be at the shoreline. The two trains therefore break in different places, and the beach sees a different mix of whitewater and clean face. Tide changes the breaking depth without changing the wave. A bar that is 3 m deep at low water is 5 m deep at high water, and the same swell may break on the bar at low tide and pass over it at high tide. That is why a beach that is working at one stage can be flat at another, even when the offshore spectrum is unchanged.

Direction and spread

Direction decides which part of the coast receives the energy. A southwest swell lands square on a southwest-facing shore; a northeast-facing shore receives only the fraction that refraction and diffraction can bend around the headlands. Two beaches 5 km apart, with the same offshore spectrum, can therefore show a clean line at one and a small, disorganised wave at the other. Directional spread decides how much of that energy is concentrated. A narrow spread means the energy arrives from a small range of angles, so an exposed point can receive nearly the full offshore height. A wide spread means the same total energy is distributed across many angles, so no single point receives the full height. That is why a clean, long-period swell with a narrow spread produces the biggest waves at the most exposed marks, while a short, spread wind sea produces a more uniform but smaller surf along the whole coast. The shape of the coastline filters the direction. A bay with a narrow entrance admits only the swell that is aligned with the entrance. A headland blocks the swell from one side and creates a shadow on the other. A reef or a shoal can refract the swell toward a particular section of beach. The spectrum gives the input; the chart gives the filter.

Why the buoy overstates the beach

A buoy typically measures in deep water, often 100 m or more. The beach is shallow. Between the two, the wave shoals, refracts, breaks and reforms. The buoy height is an offshore value, and the beach height is a transformed value. The transformation can increase the height through shoaling or decrease it through refraction, breaking and friction. The first reason for the overstatement is breaking. A wave that breaks on an outer bar loses height, and the reformed wave inside the bar is smaller. The buoy does not see the bar, so it reports the height before the loss. A beach with a shallow outer bar can reduce a 2.4 m offshore wave to 0.8 m at the shoreline, especially when the wave is short and steep. The second reason is direction. A swell that arrives at a steep angle to the coast may be refracted away from the beach or focused onto a headland. The buoy reports the deep-water direction, not the beach direction. A beach that is orientated away from the swell receives less energy even when the buoy height is high. The third reason is period. A short sea may break entirely on the outer bar and never reach the beach, while a long swell passes over the bar and breaks close to shore. The buoy's significant height combines both trains, so it overstates the train that actually reaches the sand.

Reading a spectral forecast at the ramp

Start with the peak period. A long peak period means the wave feels the bottom far offshore, breaks on outer bars and can reform. A short peak period means it breaks closer to shore and is more sensitive to local depth. If the peak period is 12 seconds or more, expect the swell to arrive at the beach with a shape that has been filtered by the shelf. If it is 6 seconds or less, expect a local sea that is closely tied to the wind. Then look at the secondary peak. A short secondary peak means chop on top of the swell. A second long peak means a confused sea. A broad shoulder means the swell is spread over a range of periods and will produce a less consistent break. The height of the secondary peak relative to the primary tells you how much of the buoy height belongs to the train you care about. Then check the directional spread. A narrow spread favours exposed points and long, clean lines. A wide spread favours sheltered marks and makes the surf less predictable. If the spread is narrow and the direction is aligned with your beach, expect the offshore height to arrive with less loss. If the spread is wide, expect a smaller and more variable surf. Finally, check the tide. The same spectrum produces a different beach at high and low water, because the depth over the bars changes. A long swell that breaks on the outer bar at low water may pass over it at high water and break at the shoreline. A short sea that breaks at the shoreline at high water may disappear at low water. The spectrum is the input; the tide is the gate.

Limits of the spectrum

A spectrum describes deep-water conditions at the measurement point. It does not include the local bathymetry, the tide, the wind at the beach, or the shape of the shoreline. Those are the transformation terms that decide what actually arrives. A spectrum from a buoy 30 km offshore can be a good input and a poor prediction at the same time. A spectrum also does not describe the sequence of sets. It is a statistical summary over a window, and individual sets can be larger or smaller than the average. A long-period swell often arrives in groups separated by lulls, which is a timing phenomenon rather than a spectral one. The groups matter for fishing: a lull lets the sand settle and pulls fish off the boil. The final limit is the buoy location. A buoy in 200 m of water measures a sea that has not been affected by the bottom. A buoy in 30 m measures a sea that has already begun to shoal. Two buoys reporting the same height can be describing different stages of the same wave, and the beach responds to the stage, not the number. Treat the spectrum as the input and the beach as the output. The transformation between them is the part an angler has to learn locally. A log of peak period, direction, tide and observed surf builds that transformation faster than any forecast model.

Sources

  1. Waves (JetStream) — NOAA · T1
  2. Shallow-water wave theory — Coastal Wiki · T2
  3. Wave measurements — NOAA National Data Buoy Center · T1