A Baitrunner Gives an Unattended Bait a Second Drag

A baitrunner reel exists to solve one problem: a fish taking a bait from a rod that the angler is not holding. Without a secondary drag, the choice is a closed bail with a tight drag that pulls the rod toward the water, or an open bail that gives line freely but also gives the fish no resistance and lets the bait drift.

reels
Cover illustration: A Baitrunner Gives an Unattended Bait a Second Drag

Key facts

SettingWorking rangeJob
Secondary drag5–15% of main dragpays line to a taking fish
Main drag25–33% of line ratingfights the fish
Line out on a take0.5–2 menough to load the rod
Handoffone handle turncancels the secondary drag
Rear leveron or offengages the free spool

Two drags, two jobs

A baitrunner adds a third option, a light pre-set drag that pays out line under a take while the main drag stays set for the fight. That secondary drag is the whole point of the reel. Everything else, the body, the spool, the line lay, is a normal spinning reel. Buy a baitrunner for the bait fishing it enables, not for the number of features on the box. The main drag is the familiar one: the knob at the front or the top of the spool that sets the resistance for the fight. It is set from the line rating, at roughly 25 to 33 percent of the line's breaking strength. The secondary drag is a separate, much lighter setting controlled by a rear lever or a small dial. It holds the bait against the current without pulling the rod in, and it allows a taking fish to move off with the bait before the angler picks up the rod. The working range is about 5 to 15 percent of the main drag. The relationship between the two is the design. The secondary drag is not a lighter version of the main drag; it is a separate system with its own washers and its own lever. Setting one does not set the other, and both need to be checked before a session. A rear lever is the common control on traditional baitrunners. Moving it engages the free spool; a half-turn of the handle cancels it. Some reels use a small dial instead, and a few use a switch on the body. The control varies, the function does not.

Setting the secondary drag

Set the main drag first, with a scale, at the working range for the line. Then set the secondary drag by feel against the bait and the current: light enough that a baitfish can swim without dragging line, heavy enough that the current does not strip line off the spool. The test is practical. With the rod in a holder and the bait in the water, watch the line at the tip. A slow, steady creep means the secondary drag is too light. No movement at all with a live bait working means it is too heavy for the bait to swim naturally. A taking fish should pull 0.5 to 2 m of line before the angler reacts. That range gives the fish time to turn with the bait and gives the rod time to load, without letting the fish reach structure or swallow the bait deeply. The secondary drag is not a trolling setting. It is designed for a stationary or slowly moving bait, and a trolled bait at speed will simply strip line against it. Use the main drag for trolling and the secondary drag only when the rod is resting.

The handle turn and the handoff

The handoff is mechanical and immediate. Turning the handle cancels the free spool and returns the reel to the main drag. There is no separate switch to find in the dark, and no lever to remember. That immediacy is why the reel suits beginners and why it suits night fishing. The angler picks up the rod, turns the handle, and the reel is in fight mode. The fish is already hooked by the time the rod loads, because the secondary drag let it take the bait without feeling the main drag. The risk is the opposite error: turning the handle before the fish has the bait. A bump or a nibble that prompts an early handle turn takes the reel out of free spool and leaves a bait that is being dragged rather than presented. Wait for the line to move steadily before the handle turn. Some reels allow the secondary drag to be adjusted while engaged, and some do not. Know which type is in hand before the trip. A reel that requires the lever to be disengaged to adjust the secondary drag is a reel that needs its setting fixed before the first cast.

Sizing the reel to the rod and the bait

Baitrunner sizes track the same numbers as ordinary spinning reels, but the ranges that make sense are narrower because the reel is doing a static job. A 2500 to 4000 suits freshwater bait work, light surf and estuary fishing with baits up to about 15 cm. A 6000 to 8000 covers beach and rock fishing with larger baits, heavier leads and bigger fish. The spool capacity should match the line the rod will carry, not the biggest line the reel can hold. A surf outfit built around 15 lb mono needs a spool that fills with that line and still leaves the 1/8 inch gap below the lip. Filling a large spool with a light line means a lot of backing and a line bed that compacts unevenly. The rod matters as much as the reel. A baitrunner sits on a rod that will spend most of its time in a holder, so the rod should have the power to cast the lead and the length to keep line clear of the wash. A 10 to 12 foot surf rod with a 6000 sized baitrunner is a coherent outfit; the same reel on a 7 foot bass rod is not. The secondary drag's usable range depends on the size of the reel. Larger models have more washer area in the secondary stack and hold a light setting more steadily, which matters when the bait is large and the current is strong. Small models can be set light, but the range between too light and too heavy is narrow. Front-drag and rear-drag baitrunners behave differently at the handoff. A front-drag model keeps the main adjustment at the spool, where it is easy to reach and hard to knock. A rear-drag model puts the main knob at the back, near the secondary lever, which makes the two controls easy to confuse in the dark. Learn the layout before the trip and set both by feel.

Where a baitrunner is wrong

A baitrunner is the wrong reel for lure fishing. The secondary drag adds weight and complexity that a lure angler never uses, and the free-spool mechanism is one more part to maintain. A standard spinning reel with a smooth main drag is the better tool for casting and retrieving. It is also the wrong reel for fishing where the rod is always in hand. If the bait is cast and retrieved continuously, the secondary drag is dead weight. The reel earns its place when the rod sits in a holder, a spike or a rest. It is a poor choice for very heavy drag applications. The secondary drag system sits inside the same body as the main drag, and the largest baitrunner models still top out below the drag of a dedicated heavy spinning reel. Match the reel to the fish, not to the feature. And it is not a substitute for a clicker or a bait feeder on a conventional reel. Those systems work differently and suit different rods. A baitrunner is a spinning-reel solution, and it belongs on a spinning rod.

Bait, current and the take

The secondary drag setting follows the bait. A small live bait needs a lighter setting than a large dead bait, because the small fish has less swimming power and the large bait has more water resistance. Set the drag for the bait, then check it again when the current changes. Current changes the equation more than the bait does. A rising tide in an inlet can double the pull on the line, and a secondary drag set in slack water will creep when the current builds. Recheck the setting after the tide turns. The take itself has a signature. A live bait that is being chased moves in short bursts; a bait that has been taken moves steadily and often against the current. The steady move is the one that calls for the handle turn. Deep hooking is the risk that the secondary drag is meant to reduce. A fish that takes a bait and meets no resistance is more likely to turn and swallow it; a fish that feels a light resistance often turns away with the bait in its mouth. That is the argument for a secondary drag that is light but not absent.

Circle hooks change the handoff

The hook shape decides what happens after the handle turn. A circle hook is built to pivot and catch at the jaw hinge once tension builds, so no strike is needed. The correct move is to turn the handle, take up the slack and let the rod load as the fish moves off. A hard strike pulls the bait out of the mouth before the hook can turn. A J-hook needs a strike, and the secondary drag's job changes with it. The free spool has to give the fish enough time to take the bait fully, then the angler lifts the rod in one motion instead of waiting for the fish to hook itself. That is a narrower window, which is why circle hooks dominate bait fishing from a holder. Line capacity belongs to the same decision. A fish that takes 2 m of line against the secondary drag is already moving when the handle turns, so the spool needs line to spare and the drag has to be set for the line rather than for the fish. A reel spooled to the lip loses the reserve that the take consumes.

Maintenance of the second drag

The secondary drag has its own washer stack and its own lever, and both need attention. Rinse the reel with the main drag tight and the secondary drag disengaged, then dry it fully before storage. Water in the secondary mechanism produces a free spool that will not fully release or a lever that sticks. Check the lever travel before each trip. A lever that moves only part of its range has grit or a worn detent, and a free spool that does not fully release is a reel that will not pay line to a take. Grease the secondary drag sparingly. The same rule applies as the main drag: a thin film, not a packed cavity. Excess grease in the free-spool mechanism can make the lever feel vague and can migrate into the main drag. Service the secondary drag at the same interval as the main drag. The system is smaller and the washers are thinner, so it wears faster in heavy use. A baitrunner that has lost its free spool smoothness is due for a strip, even if the main drag still feels fine.

Sources

  1. Spinfisher VII Live Liner Spinning Reel — Penn Fishing · T1
  2. Fixed Spool vs Baitrunner Reels: Which Is Right for You? — Procastangling · T3
  3. Top 5 Best Baitrunner Reels for 2026 — On Track Fishing · T3