Key facts
| Key fact | Detail |
|---|---|
| New Hampshire fresh water | Lead sinkers and lead jigs of 1 oz or less prohibited since 1 June 2016 |
| Painted lead in New Hampshire | Still prohibited; paint, coating and skirts do not create an exemption |
| Massachusetts inland waters | Lead sinkers, weights and jigs under 1 oz prohibited |
| Maine inland waters | Lead sinkers and jigs of 1 oz or less, or 2.5 in or less, prohibited |
| England, attached weights | Lead allowed only at 0.06 g or less, or more than 28.35 g |
| Canadian national parks | Lead sinkers, jigs, lures and flies under 50 g prohibited near park waters |
| Density, lead / tungsten / iron | 11.3 / 19.3 / 7.87 g/cm³ |
| Volume at equal weight, tungsten vs lead | 59% |
| Volume at equal weight, steel vs lead | 144% |
What the rules actually ban
The prohibitions are not uniform: New Hampshire bans lead sinkers and jigs of one ounce or less in fresh water, Massachusetts bans lead under one ounce in inland waters, Maine uses both a weight and a length threshold, England permits only the extremes of the size range, and Canada’s Rocky Mountain parks draw the line at 50 grams. New Hampshire's statute is the broadest of the American examples. No person may use any lead sinker or lead jig for taking fish in any fresh water, and the definition covers lead sinkers and lead jigs with a total weight of one ounce or less. The statute is explicit that paint, coating or an attached skirt does not change the classification. It also lists what it does not cover: lead core line, spinnerbaits, buzzbaits, spoons, poppers, plugs and flies. The prohibition took effect on 1 June 2016 and carries a fine of up to $250. Massachusetts uses a narrower trigger. Any sinker or weight made from lead that weighs less than one ounce, and any lead jig that weighs less than one ounce, is prohibited in all inland waters. The regulation's definition of a lead sinker excludes other sinkers, weights, lures and tackle, so a lead-containing lure that is not a sinker or jig falls outside that particular clause. Maine combines weight and length. Lead sinkers and unpainted lead jigs of one ounce or less, or 2.5 inches or less in length, are prohibited for use and sale in inland waters. Painted lead jigs of the same dimensions were added to the sale prohibition first, and their use becomes unlawful on 1 September 2026. The length test matters for jigs that are light but long, which a weight-only rule would miss. England regulates the middle of the range instead of the small end. A lead weight attached to a fishing line is allowed only if it weighs 0.06 grams or less, or more than 28.35 grams. Everything between those two figures is banned. The byelaw excludes lead in a weighted line, a swim feeder, or a fishing fly or lure, which is why a lead-core line or a weighted feeder is not treated like a split shot. Canada's national parks use a single metric threshold. In Banff, Yoho and Kootenay, it is unlawful to fish with or possess within 100 metres of park waters any lead tackle under 50 grams, including sinkers, jigs, lures and flies. The 100-metre buffer means the rule reaches the bank, the parking area and the approach path, not just the water. These are inland or park rules. None applies across a national border, so a sinker legal on the beach can be illegal in the estuary upstream.
Why the small sizes are targeted
The toxicity of lead does not depend on the size of the piece. The exposure path does. Waterbirds that feed in shallow shoreline areas swallow pebbles and gravel to grind food, and small split shot are close enough in size and shape to be taken as grit. Deep-diving birds such as loons also ingest sinkers attached to fish they catch. Once in the gizzard, the metal is ground and absorbed, and the bird loses the ability to walk or fly before it dies. That mechanism explains why the thresholds cluster around one ounce and 50 grams. Those are the sizes most likely to be picked up, and the sizes most often lost when a line parts on a snag. A four-ounce surf sinker is not exempt because it is less toxic; it is exempt because a bird is unlikely to swallow it. The distinction matters when reading a regulation: the number describes ingestion risk, not a safe dose. Painted and coated lead is a poor defence: New Hampshire closes that route in the statute, and a coating wears off on rocks, leaving the lead available to a bird that swallows it. Retrieval is the other half of the rule: a sinker that comes back to the tackle box cannot be ingested. Walking a snagged rig free keeps the weight on your side of the shoreline.
The density arithmetic behind every substitute
Every non-lead substitute is a compromise between density and cost. Lead has a density of 11.3 grams per cubic centimetre. Tungsten is 19.3, about 1.7 times denser. Iron, the base of most steel weights, is 7.87, roughly 30 percent less dense than lead. Those three numbers determine the size of the weight you tie on. For the same nominal weight, tungsten occupies 59 percent of the volume of lead. A tungsten weight with the same shape has about 84 percent of the lead weight's diameter. Steel occupies 144 percent of the volume, and the same shape is about 113 percent of the diameter. On the water, the tungsten weight is smaller and cuts current better, and the steel weight is bulkier and drifts more. A smaller profile passes through rock gaps and weed slots that a bulkier weight would bridge. A larger profile lands softer on the bottom in sand, but it also catches more current and more wind during the cast. Two weights labelled 1/2 ounce can behave like different tools. The density of a tungsten weight is not guaranteed by the word on the packet. Tungsten is used as an alloy or a composite, and the binder fraction changes the final density. A 97-percent-tungsten alloy is close to the pure-metal figure; a lower-tungsten alloy is not. Tungsten putty is tungsten powder suspended in a polymer, and its density is far below 19.3 grams per cubic centimetre. Buy by specified weight and, where the maker publishes it, by tungsten content, not by the adjective.
Tungsten: pay for volume, not magic
Tungsten earns its price in three situations: deep water, strong current and heavy cover. In each case the advantage is the smaller volume at the same weight. A compact flipping weight enters a gap between branches that a lead weight of the same mass would bridge. A compact jig reaches the bottom with less drift in a tide. A compact drop-shot weight transmits more bottom texture because less of the weight is presented to the current. The material has costs beyond price. Tungsten alloys are hard and can be brittle. Crimping a tungsten weight with pliers can crack it, and a cracked weight can cut line or come off entirely. Use the insert, bead or rubber collar the weight was designed for, and inspect the weight after a hard knock on rock. A chipped tungsten weight is not a cosmetic problem; the chip is a sharp edge. Tungsten also does not automatically improve feel. A heavy weight on a slack line tells you nothing. The gain comes from the smaller profile and the higher density only when the line is kept in contact with the weight. A tungsten sinker on a bowed line is an expensive piece of lead. Where tungsten does not earn its price: snag-heavy rock where weights are lost every trip, short-range bait fishing where a bulky weight is harmless, and any situation where the same money buys more fishing time in the form of terminal tackle. The right question is not whether tungsten is better, but whether the presentation depends on volume. If it does not, steel or bismuth will do the job.
Steel, tin and bismuth: the bulk penalty
Steel is the cheapest compliant option and the bulkiest. At 7.87 grams per cubic centimetre it needs 44 percent more volume than lead for the same weight. A steel egg sinker therefore sinks more slowly, drifts more in current and hangs up more readily in rock. It also tends to be harder than lead, which is an advantage on abrasive bottom and a disadvantage when the weight must deform to hold in a crevice. Tin sits close to steel in density and behaves differently at the bench. It is soft, low-melting and easy to form into split shot, but it deforms under repeated opening and closing. A tin split shot that has been squeezed onto a line several times loses its grip. Tin also has a duller acoustic signature than lead or tungsten, which matters to anglers who rely on feeling the weight tick across gravel. Bismuth is the closest practical substitute to lead in density, at about 9.78 grams per cubic centimetre. It is also brittle. A bismuth jig head can break at the collar when it hits rock, and a bismuth sinker can fracture if it is crimped too hard. Bismuth works best in shapes that do not rely on deformation, such as pre-formed jig heads with a moulded collar. All three materials are legitimate where lead is banned. None of them restores lead's combination of density, softness and price. Choosing among them is a question of which property the fishing depends on: sink rate, snag behaviour, casting distance or cost per lost weight.
Shape and rigging decide more than material
A sinker's job is to reach a depth and stay there long enough for the bait to work. Shape controls that job as much as density. An egg sinker rolls and resists hanging in rock; a bank sinker tracks straighter in current; a bullet weight slides through cover; a split shot pinches onto the line at a fixed point. Replacing a lead egg with a steel egg changes the sink rate, but replacing it with a steel bank of the same weight changes the entire presentation. The connection matters too. A sliding sinker needs a bead or a swivel to stop it above the leader, and a heavy tungsten weight needs a buffer so it does not hammer the knot. A steel weight on a light leader can abrade the line where the weight moves. The weight is not a standalone object; it is part of a chain that includes the main line, the bead, the swivel and the hook. Current amplifies the difference. In a fast tide, a bulky weight presents more area to the flow and needs more mass to hold. Switching from lead to steel at the same nominal weight is therefore not a like-for-like change; the steel weight may need to be one or two sizes heavier to hold the same bottom. That increases the load on the rod and the line, which is why a compliant substitute can expose a rod that was already near its limit.
Handling lead where it is still legal
Lead is a cumulative poison. It enters the body by ingestion and inhalation, and the small exposures at the bench add up. Do not hold split shot in your mouth to open it, do not eat or drink while handling lead, and wash your hands after rigging. Keep lead weights away from children and from any surface where food is prepared. Melting lead is a separate hazard. Lead melts at 327.5 degrees Celsius, and household pots, torches and moulds produce fumes and dross. Do not melt lead indoors, over a kitchen stove or without ventilation. If you cast your own weights, treat the work area as contaminated and keep it away from living spaces. The simplest control is inventory: weigh the sinkers you actually use. If most of your fishing is done with split shot under one ounce, you are using the class most regulations target, so the switch to tin, steel or tungsten is a decision about your usual water.
What not to substitute
Do not treat a painted or coated lead weight as compliant. New Hampshire's definition explicitly includes painted, coated and skirted lead, and other jurisdictions use similar language. A coating is not a material change. Do not assume that a lure is exempt because it is a lure. New Hampshire excludes spinnerbaits, buzzbaits, spoons, poppers, plugs and flies, but includes lead jigs. The dividing line is the definition, not the category name on the shelf. Do not upsize a non-lead weight until it matches the sink rate of the lead weight you removed. The heavier weight may reach the bottom, but it also loads the rod, changes the lure's action and makes the rig harder to cast. Adjust the shape first, then the weight. Do not rely on a sales ban as a use ban, or the reverse. Maine's painted-jig rule moved through a sale prohibition before the use prohibition, and the two dates do not match. Read the effective date for the activity you are doing. The workable check is local and specific. Identify the water, find the current rule for that water, and weigh the sinkers in the box. If the most-used weight falls inside a banned class, replace it with a shape that preserves the presentation: tungsten where volume matters, steel where it does not, bismuth where a lead-like density is worth the brittleness.
Sources
- RSA 211:13-b, Lead Fishing Sinkers and Jigs; Use Prohibited — New Hampshire General Court · T1
- Freshwater fishing regulations — Massachusetts Division of Fisheries and Wildlife · T1
- General Fishing Laws and Definitions — Maine Department of Inland Fisheries and Wildlife · T1
- National rod fishing byelaws for England: freshwater fishing with a rod and line — UK Environment Agency · T1
- Fishing and angling, Banff National Park — Parks Canada · T1
- Lead Fishing — US Environmental Protection Agency · T1
- Lead — Royal Society of Chemistry · T2
- Tungsten — Royal Society of Chemistry · T2
- Iron — Royal Society of Chemistry · T2
- Bismuth: properties and specifications — Goodfellow · T2