Key facts
| Key fact | Detail |
|---|---|
| Prime months | May–August |
| Shore jig | 1–3 ounces |
| Swimbait | 3–5 inches |
| Rod | 7–8 feet, medium-heavy |
| PWS bag | 3 per day, 6 in possession, 1 nonpelagic |
| PWS yelloweye closure | January 1–June 30 |
| Southeast pelagic bag | 3 per day, 6 in possession |
| Southeast demersal | Residents 1 per day, 2 in possession; nonresidents July 1–August 25, 1 annual |
| Release depth | 100 feet |
The depth band that makes a shore rockfish point
Identifying what is on the line decides whether it goes in the cooler or back down the wall. The shore pattern follows depth, not distance. A flat gravel beach with a long shallow shelf is salmon water. A point where the chart shows 15 to 60 feet within casting range is rockfish water, especially where the contour turns and the current hits the rock. Sitka's rocky shoreline on Sawmill Creek Road toward Silver Bay and the harbor breakwater repeat that shape. So do Juneau's road-system points and the rock walls and ferry terminals at Whittier and Valdez. The first cast should go parallel to the shore. Straight out sends the jig either into the shallows or off the edge, and both waste the drop. Work one contour, then move 20 yards and work the next. When the jig stops finding rock, the point is finished. The next opportunity is usually a short walk rather than a longer cast. Depth on a chart is a starting point, not a guarantee. Kelp, boulders and shifting sand move the productive edge from season to season, so the first few casts double as a sounding. Count how long the jig takes to reach bottom. A count that is shorter than the chart suggests means shallower water than expected, and the boat lane is closer than it looked.
Pelagic first, nonpelagic second
Pelagic rockfish suspend and feed above structure. In Alaska they include black, dark, deacon, dusky, widow and yellowtail. Prince William Sound and Southeast Alaska both set the pelagic bag at 3 per day and 6 in possession with no size limit. These are the fish a shore angler is most likely to meet, and the ones the regulations expect to be kept. Nonpelagic rockfish are the slow group. The demersal shelf list includes yelloweye, quillback, tiger, china, canary, copper and rosethorn, and the slope list adds a long set of deep-water species. Prince William Sound allows 1 nonpelagic per day and 1 in possession inside the 3-fish bag, and closes yelloweye retention from January 1 through June 30. Those limits apply whether the fish comes from a boat or from the rocks. Southeast residents may keep 1 demersal shelf rockfish per day and 2 in possession. Nonresidents get a single fish between July 1 and August 25, with an annual limit of 1 and a harvest record. Slope rockfish are 1 per day and 2 in possession for everyone in Southeast. The rules are strict because the fish are old. A yelloweye can live a century, and one kept fish represents decades of replacement. Size does not separate the two groups. Pelagic fish run mostly 12 to 20 inches and the bag is generous, while a nonpelagic of the same length can be a quillback or a copper and carries the tighter limit. Measure and identify before the fish goes on the stringer, because a fish that has been out of water for a minute is already behind on recovery.
Reading rock: contour, current and kelp
Rock tells you where to stand. A wall that drops straight into deep water puts fish within a short cast, but the same wall collects swell and makes the edge dangerous. A boulder point with kelp on the outside and a current seam on the inside is better because it gives the fish a reason to hold and the angler a place to stand. The kelp line is a depth marker. Rockfish sit at its edge rather than inside the canopy, where a jig can be retrieved without fouling. Current that runs along the rock instead of into it keeps the jig tracking straight and stacks bait on the lee side. On a slack tide the same point fishes smaller and slower, so the first cast should go where the rock is steepest. Tide decides which face of a point is worth fishing. A flood pushes bait against the upstream face and pulls fish off the lee side; the ebb reverses that arrangement. Fish the face the current is hitting and accept that the other side will be slack. Lines of foam and weed mark the seam more clearly than surface chop does.
The cast that stays above the bottom
The shore setup is a 7- to 8-foot medium-heavy rod, a 1- to 3-ounce leadhead and a 3- to 5-inch swimbait. That weight range is a practical compromise: heavy enough to sink along a wall in current, light enough to lift and glide without snagging on every pump. A rod stiffer than medium-heavy pulls the hook out of a fish that has taken the jig on the fall. Cast at an angle to the wall rather than perpendicular to it, let the jig count down until the line goes slack or the tick of rock comes through the rod, then lift in short pumps and take up slack on every drop. Most bites come on the fall, so a loose line on the drop is a missed fish. A stuck jig comes free with slack and a changed angle, not with a hard jerk. Line control decides whether the count is honest. Braid in the 20- to 30-lb class has little stretch, so contact with rock arrives as a sharp tick rather than a soft load. A long mono topshot blunts that signal and makes the count less reliable. Hold the rod at about 45 degrees and take up slack as the jig falls, so the first lift starts from contact instead of from a loop of line.
Jig, swimbait and teaser
A leadhead and swimbait is the shore default because it fishes at any depth and casts into wind. A metal vertical jig is better when current runs hard and fish sit tight to rock, because it sinks fast and keeps contact. A small teaser above the leadhead adds a second chance without changing the cast, and it costs nothing when the main lure is already in the strike zone. Color should follow the bait. White, pearl and chartreuse work in most water, and black or purple is worth trying in low light or when plankton thickens the water. Black rockfish often hit high in the column, so count only halfway down on the first cast, then lengthen the count until the fish are found. Two sharp lifts, a pause with the jig falling on a semi-tight line, then a slow sweep is the whole retrieve. Hook size follows the bait. A 3- to 5-inch swimbait takes a 3/0 to 5/0 hook, and an oversized hook kills the tail action that draws the strike. Rig the leadhead so the point sits at the top of the bait's back rather than buried in the plastic, and check the tail after every contact with rock. A torn swimbait still catches fish, but one that has slid down the hook shank does not.
Sending a released fish back down
A rockfish hooked in deep water comes up with an expanded swim bladder. Its eyes bulge, its stomach can sit in its mouth, and it cannot swim back down on its own. Putting it over the side is not a release; it is a floating fish that gulls and seals will find. A descender is a weighted clip that carries the fish back to depth and releases it there. In Prince William Sound and Southeast Alaska, a rockfish that is not kept must return to the depth where it was hooked, or to 100 feet. The vessel requirement does not apply to an angler standing on rock, but the fish needs the same treatment. In water shallower than 100 feet, that means the bottom. Keep the descender ready before the first cast: a heavy rod or handline, a clip, and enough weight to overcome the fish's buoyancy. Weight is the variable that decides whether a descender works. A pound of lead takes a small rockfish down in calm water, and a larger fish in current needs more. Clip the fish at the lower jaw so the release trips cleanly, lower it without stopping, and watch the line for the moment the clip opens. A descender that is too light simply adds a second floating fish to the surface.
Lingcod and the identification decision
A rockfish jig is also a lingcod jig. Prince William Sound opens lingcod on the first of July and closes the season at the end of December. One fish is the daily limit, one is the possession limit, and the minimum is 35 inches with the head on. A lingcod taken in June is closed, and a short fish is illegal even when it looked large in the net. The identification call happens fast because the two species share the same rock. A lingcod has one long dorsal fin with a notch and rigid spines at the front, a wide mouth and canine teeth. A rockfish has a continuous dorsal fin and a softer mouth. Look at the head and the dorsal line before lifting the fish out of the water, and check the emergency orders, which can change an area's bag inside the season.
Slippery rock, swell and the edge of the point
Most rockfish points are not places to wade. The rock is wet, the weed is slick, and the swell that makes the point productive also makes the edge dangerous. Wear a PFD and a wading belt on an exposed shore, and skip chest waders where a wave can fill them. Check the swell before the wind: long-period swell can leave the outside of a point unfishable while the inside looks calm. A rising tide can cut off the route back along the rocks. Fish with a partner when the access is a scramble, and tell someone which point you are on and when you plan to leave. The pattern itself also ends in winter: by late autumn the shallow band empties as rockfish move deeper, and a point that produced in July is bare in December. May through August is the shore window. Walk the access at low water and pick the return line before the tide turns. A shelf that is dry in the morning can be chest-deep by noon, and the point that fishes best on the flood is the same point that strands anglers on the flood. Time the session to the tide rather than to the number of casts already made.
Related reading
Shore jigging rod specs Deep-water release rig Reading reef and rock structure Fish identification when two species look alike
Sources
- 2026 Southcentral Alaska Sport Fishing Regulations: Prince William Sound — Alaska Department of Fish and Game · T1
- Southeast Management Areas Fishing Reports: Juneau, 2026 — Alaska Department of Fish and Game · T1
- Bottom fishing and Rockfish, Lingcod, and Halibut fishing in the Sitka area — Alaska Department of Fish and Game · T1
- How to Fish Sitka, Alaska — Guidepole · T3