Cutlassfish Under Pier Lights on 20 lb Wire, July to January

Cutlassfish are a cold-season fish on the Japanese Pacific coast, and they are caught at night under lights. The fish is long, silver and almost entirely teeth; it suspends in mid-water and takes a moving metal jig rather than a bait on the bottom. The fishery is simple in principle and fiddly in practice.

japanDifficulty 2/5
Cover illustration: Cutlassfish Under Pier Lights on 20 lb Wire, July to January
Targetscutlassfish
Waterharbor, pier, nearshore
Regionsjp
Seasonautumn, winter
Methodsshore casting, jigging, lure fishing

Key facts

SignalRead
SeasonJuly–January
PeakSeptember–November
Depthmid-water, not the bottom
Jig40–60 g metal
Leader20 lb wire, 30–50 cm
MainlinePE 0.8–1.0
Roda shore jigging rod that loads on the lift
Lightpier lamp, floodlit wall
Retrieveslow lift and fall
Handlinglong pliers, wet cloth

A pier lamp builds a bait chain

A pier lamp attracts plankton, plankton attracts small bait, and cutlassfish follow the bait into the lit water. The fish do not need the light itself; they need the food chain that the light creates. That is why a dark pier with one working lamp can out-fish a fully lit promenade. Fish the edge of the lit area rather than the brightest centre. The bait sits in the transition, and the cutlassfish hang just outside it, facing the light. A cast that lands in the bright centre spooks the fish and catches nothing. The light also determines depth. Plankton concentrates near the surface, so the fish suspend in the upper layer. A jig that is allowed to sink to the bottom is below the fish for most of the retrieve.

Reading a lit pier

Every lit pier has a pattern. The lamp usually sits at the root, the brightest water is under it, and the dark water at the tip is where bait collects when the tide runs. A fish is more often caught off to one side of the lamp than directly beneath it. Bait size tells you which fish are present. Small, dense bait under the lamp brings anchovy and small mackerel, and the cutlassfish follow in the upper layer. Larger, scattered bait means the fish are deeper, and the jig has to count down further. The tide changes the pattern. A running tide carries plankton past the lamp and spreads the lit band downcurrent; a slack tide holds it in a narrow cone under the lamp. The cast should follow the band, not the lamp.

A 40–60 g jig on wire

A 40 to 60 g metal jig is the working range in the guide. A slim, long jig sinks slowly and flashes like a baitfish; a heavy jig sinks fast and misses the suspended layer. The retrieve is a slow lift with a short pause, not a fast rip. Wire is not optional. A cutlassfish will cut a fluorocarbon leader on the first shake. A 20 lb wire leader of 30–50 cm is the practical compromise: long enough to protect the line, short enough to cast. The line is PE 0.8 to 1.0, which is enough to cast the jig and thin enough to feel a soft take. The shore jigging rod spec page covers rod ratings. The rod has to load on the lift rather than on the cast, because most of the work is done with a slow, repeated lift. A slim jig with a slow, wide wobble is the default. It sinks at a rate that keeps it in the upper layer for most of the retrieve, and its flash matches the bait. The heavy end of the box is for wind or a fast tide, not for calm water. Count the fall. Let the jig hit the surface, then count until the line goes slack at the depth where bait is holding. A jig that stops in the strike zone stays there; one allowed to sink to the bottom fishes below the fish. The retrieve is a short lift, a pause and a slow fall. Most takes come on the fall, and the fish hooks itself against the weight of the jig. A fast rip pulls the lure away from a following fish.

The take and the lift

A cutlassfish take is often a light tick rather than a solid thump, because the fish grabs the tail of the jig. Set the hook with a steady sweep, not a violent strike. A hard strike pulls the jig out of the mouth or cuts the wire. Once hooked, keep the rod tip up and the line tight. The fish thrashes and rolls, and a slack line loses it. Lift steadily rather than pumping, because the wire has less stretch than nylon.

Handling a fish with teeth

A cutlassfish should never be touched with bare hands. Use long pliers to grip the hook, and a wet cloth or a lip grip to control the body. The teeth can cut through a glove, so keep fingers away from the head. Unhook the fish over the water or over a wet mat. A dropped cutlassfish is a lost fish and a sharp object on the pier. If the fish is kept, place it in a cool box rather than on the concrete.

Season, tide and the hours after dark

In Tokyo Bay, the guide puts the season at July to January, with September to November the core. The fish move inshore as the water cools and follow the bait into the ports. A warm autumn delays the run; a cold snap can bring it forward. The prefectural view is consistent with that. Kanagawa's fisheries centre, based on 2020 survey work in Tokyo Bay, records cutlassfish landings rising as once-common targets such as mantis shrimp and stone flounder declined, and notes that a fish can pass 300 g within its first year. A fast-growing, short-lived stock is what makes a winter shore run possible in the first place. The same page notes that by midwinter the fish move deep enough that a shore cast no longer reaches them. That is the back edge of the season, and it is a reason to fish the core rather than the calendar. Tide matters less than light and bait for this fishery, but a moving tide still helps. The hours after dark are usually better than the middle of the night, and the approach of dawn can produce a second window. The autumn cooling turnover page explains the mixing that brings bait inshore as the surface cools.

Pier access and local rules

Piers are working infrastructure. A lit pier may be closed to fishing during cargo operations, and a gate that is open at night can be locked by morning. Some prefectures restrict night fishing from specific harbour walls. As of 2026 the harbour point map still marks the same lit walls and the same night gate, with no closure posted. National law sets the outer frame; the Japan sea fishing basics page summarises it. Check the harbour notice, keep clear of mooring lines and cranes, and do not cast over a vessel.

A dark night with a running tide

A dark night with a running tide beats a bright night with slack water. The fish use the lit band, and a tide that keeps the plankton moving keeps them feeding. No bait under the light means no fish. A working lamp beats a decorative one. A stirred harbour after a storm kills the night bite. Angler traffic closes the list. A famous pier is fished every night, and the cutlassfish become wary of metal. A quieter wall with one lamp often produces better fishing.

What to carry on a winter pier night

A cutlassfish session is short on tackle and long on cold. The working kit fits in a small bag: a 7 to 8 ft shore jigging rod, a 3000 to 4000 size reel, one spool of PE 0.8 to 1.0, a packet of 20 lb wire cut into 30 to 50 cm lengths, and four or five metal jigs between 40 and 60 g. Two shapes are enough, a slim sinking model and a slightly wider one for a fast tide. The rest of the bag is about handling and warmth. Long-nosed pliers, a wire cutter, a headlamp with a red setting, a towel and a cool box with a couple of ice packs cover the fish and the fingers. A lamp that only has a white beam is a problem on a crowded pier: it blinds the next angler and it lights the water you are trying to fish. Clothing matters more than another jig. The pier is cold, damp and windy, and an angler who is shivering stops fishing before the bite does. A windproof shell over a fleece, a warm hat and gloves with the casting fingers free are the difference between a two-hour session and a four-hour one. Keep a spare dry towel in the car for the drive home. A small torch and a spare battery belong in the bag as well. The lamp that lights the walkway is rarely the lamp that lights the fish, and a dead headlamp turns a simple unhook into a fumble in the dark.

Six mistakes on a cutlassfish night

Fishing the brightest part of the light is the commonest error. Letting the jig sink below the fish wastes the retrieve. A fluorocarbon leader will not survive the teeth. Striking hard at a soft take pulls the jig free. A gloved hand is not protection enough near the head. Standing under a crane or inside a cargo gate is a safety problem.

Sources

  1. タチウオ — DAIWA · T3
  2. タチウオ り が るべき7つの けと り · T3
  3. https://www.pref.kanagawa.jp/docs/mx7/cnt/f430693/zukan-tachiuo.html · T1