The cage edge is a legal line before it is a fishing spot

The sounder shows a wall of fish twenty metres from the net and nothing beyond it. Your engine is idling, the farm crew is watching, and the boundary between a good drift and a violation is a line you cannot see. Get the number before you get the cast.

structure
TargetsEuropean seabass, Gilthead seabream, Bluefish
Watersaltwater
RegionsNorway, Tasmania, New Zealand
Methodsjigging, drifting, bottom fishing
Quick answer

Confirm the lease boundary or exclusion distance for that farm, stay 20 to 100 m outside it depending on jurisdiction, and fish the down-current edge after feeding ends.

Why fish collect at a cage edge

A cage is a floating structure with a net, a walkway, mooring blocks and a feed system. Each of those pieces changes the water around it. The net and floats cast shade. The moorings interrupt flow. The feed adds food that the farmed fish do not eat. Wild fish gather for the same reasons they gather at a reef: cover, a current break, and a reliable food supply.

The food supply is smaller than most anglers imagine. FAO's aquaculture manual states that 90% of feed should be consumed within 15 minutes of feeding, and that feeding frequency falls to one to three times a day as fish grow. A farm is not leaking food all day. It releases a short pulse, several times a day, and the wild fish around the cage have learned the schedule better than you have.

That creates a predictable band. Baitfish hold 5 to 20 m outside the net and 3 to 15 m down, facing into the current. Predators sit below and slightly downstream, where they can see the bait against the net without being inside the cage. The densest mark on the sounder is often directly under the cage, which is also the one place you cannot legally or safely present a lure.

Current decides which edge is alive. On a flooded tide with 0.3 to 0.5 kt running, the down-current edge collects the drifting particles and the fish face up into them. At slack water the fish spread out and the edge goes quiet. Reading that seam is the same skill as reading any other current line, and the principles in reading current seams apply unchanged.

The mistake is treating the cage as one spot. It is four edges, and only one or two of them are working at any moment. Arrive, look at the flow, and pick the edge before you pick the lure.

No single legal distance

Norway publishes one of the clearest rules in the world. The Directorate of Fisheries states that when fishing you must keep a distance of more than 100 m from the nearest fish farm, and that all boat traffic must keep at least 20 m from fish farms and their moorings. The national rule for Norwegian waters was checked on 15 November 2026. It is not a rule for Scotland, Chile, Greece or Maine.

Tasmania uses a different legal model. Recreational fishing inside a marine farming lease is not allowed without the leaseholder's permission, because the lease grants exclusive occupation of the water and seabed. The corners of the lease are marked with yellow IALA special marks, and the official advice is to keep clear of the boundaries and not enter the lease area at all. There is no general 100 m buffer, because the boundary itself is the line. Checked on 15 November 2026.

New Zealand's Coromandel mussel farms sit under a third model: recreational anglers are welcomed around the farms, provided they keep 30 m from working barges, do not tie to a line being worked, and do not anchor into the longlines. The farm association publishes those rules as safety guidance. Three countries, three distances, three different legal instruments.

So the working answer is a range rather than a number: from a 20 m traffic buffer and a 30 m working-barge buffer, through a 100 m fishing exclusion, to a total prohibition on entering a marked lease. Check the current notice for the state or country you are in, and check it for the specific farm, because individual leases can carry conditions that are stricter than the national rule.

Here is a worked check you can repeat anywhere. First, find the farm on the official aquaculture lease map or list; Tasmania, for example, points anglers to LISTMap. Second, read the lease conditions or the local fisheries notice for a stated distance. Third, measure from the outermost mooring or marker, because moorings can extend outside the boundary. Fourth, write the distance and the boundary bearing on the console before you start fishing. If any of those four steps fails, treat the farm as closed water and fish somewhere else.

The feeding window and the current

Farms feed on a schedule, usually one to three times a day, and the meal is short. The fish respond within minutes and the wild fish around the cage respond with them. The practical window is often described by skippers as 30 to 60 minutes after the feed ends, which is experience consensus. What is published supports the shape of it: a 15-minute consumption target means the food pulse is brief, and the fish that missed it are still searching afterwards.

Current sets the direction of that window. At 0.3 kt, water moves 0.15 m per second, or 9 m per minute. A particle released at the cage is 27 m down-current after three minutes and 90 m away after ten. That is why the fish that follow the feed trail end up on the down-current edge and why the up-current edge can be empty even when the cage is full of fish.

The strength of the current decides how tightly they hold. Below 0.2 kt, the trail spreads in all directions and the fish scatter. Between 0.3 and 0.6 kt, there is a clean line and the fish stack along it. Above 0.8 kt, the down-current edge becomes hard work, and the fish tuck into the lee of the cage or drop deeper.

This is the part most visiting anglers get backwards. You arrive from up-current, cut the engine, and fish the edge nearest the boat, which is the up-current edge. The fish are 40 m behind you. Turn the boat, approach from down-current, and cast back toward the cage so the lure swings with the flow.

If the farm is not feeding that day, the edge still holds fish, but the pattern is weaker and more dependent on natural current. Fish the seam at the change of tide, when the flow reverses and the down-current edge swaps sides. That reversal is often the best 40 minutes of the day.

Casting, drifting and anchoring outside the line

The first method is the outside cast. A 2.7 m light-game rod with a 30 to 40 g jig casts 40 to 50 m in calm air. If the boundary is 60 m away, you position the boat 70 m out, cast 45 m, and the lure lands 25 m short of the line. The margin is comfortable. If the boundary is 30 m away, the same cast puts the lure inside it, and no amount of skill fixes the geometry. Move the boat.

A 30 g jig on light braid is the right tool for this distance, and the tackle has to match the range you are asking of it. The rod and line combinations in light-game rod specification make the case that the headline lure rating is the least informative number on the blank; what matters here is a rod that puts 30 to 40 g out at 45 m without loading so deep that the cast becomes a lob. Heavier tackle shortens the cast and pushes you closer to the line.

The second method is the downwind drift. At 0.4 kt, the boat moves 0.21 m per second, or 12 m per minute. A three-minute drift covers 37 m. If you start 40 m outside the boundary, you cross it before the drift ends. Start 100 m out, drift for four minutes, and you finish 50 m clear. The arithmetic is the whole method: drift speed times drift time, plus a buffer for the distance you lose while fighting a fish.

The third method is the bottom. Cages are sited over a depth change, a reef, or a patch of harder seabed, and that structure extends beyond the lease. Anchor outside the line with a 3:1 scope, so 30 m of depth needs 90 m of rope, and fish the rock or weed patch that the farm was built on. This is where grouper, pollack and bream hold when the pelagic edge is quiet. A slow-pitch jig or a soft plastic worked along the bottom does the job without approaching the net.

The three methods cover three different distances and three different currents. Cast when you can stay outside with margin. Drift when the current is predictable and you can start far enough out. Anchor when the fish are on the bottom and the surface edge is dead. None of them requires you to be inside the boundary, and none of them requires you to guess the distance.

What the farm crew needs from you

Call the farm before you approach. Most sites monitor VHF, and a short call saying where you are and what you intend to do removes the suspicion that produces a patrol boat visit. The Coromandel association asks visiting boats to call up on Channel 17 and to keep that channel free for working traffic, which is a useful model even where no such notice exists.

Keep 30 m from working barges and feed boats. A crew handling a feed hose or a net does not want a lure landing beside them, and the association is explicit that crews get injured by flying hooks and sinkers. Do not tie to a line that is being worked. Do not anchor into longlines. Some horizontal longlines run subsurface, so a line that looks clear on the surface may have gear 2 m under it.

Ask which cage is being fed and when. A farm with twenty cages feeds them in rotation, and the cage that produced a slick at 07:00 may be idle at 14:00. The crew knows the schedule and usually does not mind sharing it. They also know which cages have had net repairs or divers in the water, which is useful information for your own safety.

Keep your wake small within 200 m of the farm. Wash disturbs the fish, stresses the stock and gives the operator a reason to move you on. Five knots or less, no bow-up acceleration through the mooring field, and no engine revving to hold position against the current.

What you get in return is access. Farms that are treated well by anglers tend to stay open to them, and the alternative is a gate that closes for everyone. The courtesy is not decoration; it is the thing that keeps the edge fishable next season.

What turns a legal drift into a violation

The most common violation is not an approach. It is a hook-up. You start 60 m outside the line, hook a 5 kg fish, and fight it for four minutes. At 0.5 kt the boat drifts 62 m during the fight, and the fish swims toward the cage because that is where the structure is. You end up inside the boundary with a fish on, and the rule does not care why.

The fix is procedural. If you are hooked up within 100 m of the line, put the engine in gear and hold position. If the fish runs at the cage, apply maximum pressure early and turn it, or break it off. Losing a lure costs less than losing access. This is the explicit failure mode of the downwind drift method, and it is the one that catches experienced anglers.

The second trap is the visible marker. In Tasmania the yellow IALA marks sit on the lease corners, but the moorings can extend outside them. In Norway the 100 m is measured from the farm, and the farm includes the mooring spread. If you navigate to the nearest float, you are already too close. Measure from the outermost piece of infrastructure you can see, then add the buffer.

The third trap is night. Boundaries do not become optional after dark, and a lit cage is easier to approach too closely because the light pulls you in. Keep the same distance at night, reduce speed, and use the chart.

A short checklist covers most of it. Boundary distance confirmed for this farm. Measured from the outermost marker or mooring. Drift time multiplied by drift speed, plus a 50 m buffer. Engine running when hooked up near the line. No casting at crews, no tying to working gear, no anchoring in the lease. If any line on that list is uncertain, stay out.

The edge is worth the discipline. A cage in 20 to 40 m of water concentrates more fish per square metre than almost any natural structure you can reach in a small boat. It also has an owner, a lease and a crew, and the fish are there because the farm is working. Fish the seam, respect the line, and the edge stays available. The trade comes down to that.

Short version

  • Fish gather on the down-current edge because feed is a short pulse; FAO's guidance targets 90% consumption within 15 minutes.
  • Verify the rule per farm: Norway states more than 100 m for fishing and 20 m for boat traffic, while Tasmania prohibits fishing inside a marked lease without the leaseholder's permission.
  • Measure from the outermost mooring or marker, and calculate drift before you start: 0.4 kt covers 37 m in three minutes.
  • Hold position with the engine in gear if you hook up near the line; a four-minute fight at 0.5 kt can carry you 62 m into the boundary.

Sources

  1. Sea angling in Norway: regulations you should know — Norwegian Directorate of Fisheries · T1
  2. Marine Farms - Fishing Advice — Fishing Tasmania (Tasmanian Government) · T1
  3. If I decide to feed my animals, how much feed will they need? How do I feed and how often? — Food and Agriculture Organization of the United Nations · T1
  4. Fishing — Coromandel Marine Farming Association · T3
  5. How To: Jigging — Shimano · T2
Cast Up-Current Along a Seam, Retrieve the Slow Edge
Light Game Rod: Solid Tip and Fast Taper, Not Just 10 g
When a 1–15 g jig beats bait in harbour water